E46 rear shock absorbers, Torque settings.
Discussion
E30M3SE said:
Rear shock to trailing arm is 44 lb/ft.
Are you sure on that one? According to the BMW TIS:
http://tis.spaghetticoder.org/s/view.pl?1/04/44/34 :
http://tis.spaghetticoder.org/s/view.pl?1/03/70/51 ) 1AZ: Shock absorber to trailing arm/ wheel carrier/ swinging arm/ support arm/ control arm (tighten in normal position): E36, E46, E83, E85, E86 = 100 Nm (73 lb/ft)
4rephill said:
E30M3SE said:
Rear shock to trailing arm is 44 lb/ft.
Are you sure on that one? According to the BMW TIS:
http://tis.spaghetticoder.org/s/view.pl?1/04/44/34 :
http://tis.spaghetticoder.org/s/view.pl?1/03/70/51 ) 1AZ: Shock absorber to trailing arm/ wheel carrier/ swinging arm/ support arm/ control arm (tighten in normal position): E36, E46, E83, E85, E86 = 100 Nm (73 lb/ft)
rumple said:
Im gonna crawl under and do it to that, it was a lot tighter than 44 lb/ft when i undid it.
That was My main concern - I didn't want to risk you having it come loose!This site also quotes nearer to the BMW TIS sites torque setting: http://www.dvatp.com/bmw/diy/shocks_and_springs/ (81 ft*lbs)
(Under the bottom right hand picture of the lower shock assembly)
The BMW TIS site can take a bit of digging around to find what you need (and some sections aren't covered at all for some reason), but it's a good reference tool.
4rephill said:
rumple said:
Im gonna crawl under and do it to that, it was a lot tighter than 44 lb/ft when i undid it.
That was My main concern - I didn't want to risk you having it come loose!This site also quotes nearer to the BMW TIS sites torque setting: http://www.dvatp.com/bmw/diy/shocks_and_springs/ (81 ft*lbs)
(Under the bottom right hand picture of the lower shock assembly)
The BMW TIS site can take a bit of digging around to find what you need (and some sections aren't covered at all for some reason), but it's a good reference tool.

rumple said:
Mucho gracios, spent the day rewiring the drivers memory seat today, only thing ive really had trouble with, its like the loom is brittle and breaking up, sore knees now, and not in a good way.
Sore knees? - Been there! - done that! 

(These days, to add to the sore knees, after a good long session of fixing something whilst kneeling down [usually on lumpy tarmac or concrete
], when I try to stand up I find My legs don't want to straighten out!)My current project is trying to track an annoying trim rattle in the passengers foot-well:
So far - No joy!

Gassing Station | BMW General | Top of Page | What's New | My Stuff


