My non stalling wedge

[marcus1875]

Bored so thought I would post some pics of my wedge....The interior is a bit sparse, so any suggestions on sources would be welcome!

[marcus1875]

why does only one photo show at a time!

[mrzigazaga]

Hi Mate..They might be too big..2mb is the limit...Ziga

[mrzigazaga]

marcus1875 said:

Hi Mate, I thought they were too big but they are pretty small...You just need to either put a space between them each time you upload one or if they are bigger then put the cursor at the end of each one and press return...I just put a space between each upload...Ziga

[marcus1875]

Morning Mark, thanks for doing that mate. like i told you before i'm pretty useless at computers.
Can you make out the interior shot? It is very bare, any idea on where to get trim, carpets, etc?

[mrzigazaga]

Hi Mate..Sorry cant really make out the interior..What else does it need?...Carpet should really be a good quality stitched back..Not foam cos that rots and falls apart when you cut it..Ideally you would lay some Carpet under-felt, Sound proofing/jute down over the floor first..Door cards can be cut from 3mm Hardboard and i make you a template if you need it..If you need arm rest's i might be able to help..Can you try to take some more pics of the interior and doors..Also if you are buying and fitting the carpet yourself then try to buy it from an automobile supplier and not household...

Here are a couple of links...You can request samples first!

http://www.google.co.uk/url?sa=t&rct=j&q=c...
http://www.google.co.uk/url?sa=t&rct=j&q=c...

Edited by mrzigazaga on Monday 27th August 10:37