Cerbera Window
Discussion
Right, this is driving me mad! To try and remove the howl at speed, i've done the following:
Cleaned & lubed and the passenger side electric window, window now goes up and down far more swiftly. But there's still two issues:
Does'nt sit in the outer seal of the door, sort of get's pushed out a bit by the rubber seal rathe than going straight up. ( Brand new inner door seal, same size as the old one and "firmly" fitted in place.
Opening and closing the door, the window does'nt go up as high as it can if you do it manually with the switch, about a 5mm gap.
Any words of wisdom greatly appreciated! Or is it as simple as updating the chips for the window control for the newer passenger door seal? If so, where on earth do you get them. No joy with google so far.
Cleaned & lubed and the passenger side electric window, window now goes up and down far more swiftly. But there's still two issues:
Does'nt sit in the outer seal of the door, sort of get's pushed out a bit by the rubber seal rathe than going straight up. ( Brand new inner door seal, same size as the old one and "firmly" fitted in place.
Opening and closing the door, the window does'nt go up as high as it can if you do it manually with the switch, about a 5mm gap.
Any words of wisdom greatly appreciated! Or is it as simple as updating the chips for the window control for the newer passenger door seal? If so, where on earth do you get them. No joy with google so far.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff