Droopy mirror
Droopy mirror
Author
Discussion

gizzardio

Original Poster:

216 posts

183 months

Tuesday 28th August 2012
quotequote all
My drivers side mirror has gone loose and needs tightening. Can it be accessed from the small metal panel (about 3inches square) with four screws just in front of the mirror which is visible when u open the door?
Or is it door panel off time. Thought I'd ask before I unscrew things which I don't know what they hold and things fall into the door.

Either way, what will I find, ie.allan key or wing nuts or is it completely variable?

Thanks.


phillpot

17,510 posts

212 months

Tuesday 28th August 2012
quotequote all
gizzardio said:
Can it be accessed from the small metal panel (about 3inches square) with four screws just in front of the mirror which is visible when u open the door?
Think the panel you're refering too is all part of the window frame.
If you have the mirrors with "rubber bands" they are a bit of a fiddle. Had them on my Chimaera but too long ago now to remember exactly how I went about sorting my droopy one!
Seem to recall there is a grub screw under the gaiter thing between mirror body and the door but access is near impossible ???

Sure someone who knows more will be along shortly ............



zombeh

695 posts

216 months

Tuesday 28th August 2012
quotequote all
There is indeed a grub screw under the rubber boot bit, you'll probably have to take the mirror off to get to it though. If you grab the mirror you should be able to unscrew the whole thing off the door. Of course this is when you discover that the reason it's "droopy" is that the bit that holds it to the door is broken.

http://marcosforum.org/reply/28096#.UD0uDmzgX1o is worth a read smile

gizzardio

Original Poster:

216 posts

183 months

Tuesday 28th August 2012
quotequote all
Thanks. Looks like i should prepare myself for double jointed finger fiddling then.

Edited by gizzardio on Wednesday 29th August 00:32

gizzardio

Original Poster:

216 posts

183 months

Tuesday 28th August 2012
quotequote all
Ps that link Seems really good.

gizzardio

Original Poster:

216 posts

183 months

Tuesday 4th September 2012
quotequote all
Sorted. Was the grub screw once I'd located it. Tightened it, span it round and it holds.

Oldred_V8S

3,764 posts

267 months

Wednesday 5th September 2012
quotequote all
gizzardio said:
Ps that link Seems really good.
They have the benefit of having the turret between the door and the mirror so they have room to lift the black skirt to tighten the grub screw. Unfortunately on a TVR that screw is on the inside of the mirror stem in a recess furious