400 Swirl Pot replacement
Discussion
Next on my long list of jobs to do on the 400 is the replacement of the rear fuel pipes and filter.While im going about this I was thinking of replacing the swirl pot for a nice ally one from Wedge Automotive, I have been told however that the swirl pot hoseing to the tanks is a pig to replace, ie not enough room to slide both ends on without moving a tank! anyone done this job? advice appreciated.
Never had that sort of problem. Be prepared to cope with lost of fuel though!Even when empty, there can be several litres hidden.
Demon Tweeks do the pots as well.
Steve
www.tvrbooks.co.uk
Demon Tweeks do the pots as well.
Steve
www.tvrbooks.co.uk
Steve, which pot is it in the Demon Tweeks Catalogue??
I need something for the Tasmin 200 to feed into a standard Cosworth pump and filter.They are mounted on the plate in front of the N/S trailing arm where the 280 would have it's pump.
Where does the swirl pot mount?
Regards SteveE
I need something for the Tasmin 200 to feed into a standard Cosworth pump and filter.They are mounted on the plate in front of the N/S trailing arm where the 280 would have it's pump.
Where does the swirl pot mount?
Regards SteveE
Gassing Station | Wedges | Top of Page | What's New | My Stuff