Gold bar question
Author
Discussion

Vvroom

Original Poster:

1,170 posts

221 months

Monday 3rd September 2012
quotequote all
As there isn't a Jewellery forum....

I'm in the market for a wedding ring, I fancy 18kt yellow gold: a simple affair- 6mm, 'D' profile with a millgrain edge, size S1/2. I'm being quoted £7-800 based on about 9g of gold. I'm not a fan of platinum.

I have a 10g bullion bar of 99.9% pure gold (so 24ct) which resulted from a drunken spending spree some time ago.

Before I make myself look daft with the jeweller- can 24ct be used for jewellery or is it too soft? Would they have to mix it with an alloy? Also, does anyone have any idea how much it would cost to get the ring made from the bar?

(I say 'gold bar' but it's more like an oxo cube!)



Eighteeteewhy

7,259 posts

199 months

Monday 3rd September 2012
quotequote all

Vvroom

Original Poster:

1,170 posts

221 months

Monday 3rd September 2012
quotequote all
clap

Quote

7,690 posts

309 months

Monday 3rd September 2012
quotequote all
Vvroom said:
Before I make myself look daft with the jeweller- can 24ct be used for jewellery or is it too soft?
I have a 24ct wedding ring, so Yes they can be used as jewellery. I bought my wife's engagement ring in 24ct and was then told that hew wed ring would have to be the same ct or the lower ct ring would abrade the higher. I got mine to match hers.

ecain63

10,653 posts

206 months

Monday 3rd September 2012
quotequote all
I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?

Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.

Vvroom

Original Poster:

1,170 posts

221 months

Monday 3rd September 2012
quotequote all
ecain63 said:
I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?

Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Very interesting, I hadn't appreciated the amount of wastage.

Indication of the price doing as you suggest?

ecain63

10,653 posts

206 months

Monday 3rd September 2012
quotequote all
Vvroom said:
ecain63 said:
I can turn the 24ct to 18ct if you need (by standard mixing process), and make your wedding band to suit. Solve the problem?

Note: Your 24ct, 10g lump wouldnt produce a 9g 24ct band as you have to allow for waste in the melt, filings during creation and finally polishing losses. Ideally you need to start with at least a 50% excess to allow for all this.
Very interesting, I hadn't appreciated the amount of wastage.

Indication of the price doing as you suggest?
I would if your profile allowed emails. You can get me at

niacuk@yahoo.co.uk or call me on 07780457543 at work.

Vvroom

Original Poster:

1,170 posts

221 months

Monday 3rd September 2012
quotequote all
Will drop you a line tomorrow. Thanks