Decent watch repair tool kit?
Decent watch repair tool kit?
Author
Discussion

doosht

Original Poster:

200 posts

187 months

Friday 7th September 2012
quotequote all
I am a complete newbie when it comes to taking apart watches and have an old Seiko 5 that has not worked for a while. I would like to get this working again or at least have a dabble at it. I dont mind spending a little bit on the kit, perhaps £50 or so? So, can anyone recommend a worthwhile kit or is my budget not enough?

Many thanks.

P.S No - i dont want to take it to a watch repairer.... i like tinkering :-)

clockworks

7,813 posts

176 months

Friday 7th September 2012
quotequote all
You could buy enough tools to take a watch apart for £50 (springbar tool, caseback remover, screwdriver set), but what about cleaning and oiling it (ultrasonic tank, cleaning and rinsing fluids, oil and oilers, magnifier/loupe), and putting it back together (tweezers, movement holder)?

Couple of hundred might do it.

Tanguero

4,535 posts

232 months

Saturday 8th September 2012
quotequote all
And if you do decide to go for it, then get yourself a few knackered manual movements for a few quid from eBay to practice disassembly/assembly on. You will destroy the first few you attempt.

If it is a Seiko 5 movement there is a great tutorial here http://www.clockmaker.com.au/diy_seiko_7s26/ that will at least give you an insight as to what is involved.

Disco You

3,749 posts

211 months

Sunday 9th September 2012
quotequote all
I looked into this a while back. You need quite a bit of kit to get started properly, and you'll almost certainly knacker the first few that you practice on.