e36 323 and 325 differences
e36 323 and 325 differences
Author
Discussion

orangesrule

Original Poster:

1,975 posts

179 months

Saturday 8th September 2012
quotequote all
Basically i am looking for a bit of cheap rwd fun, my preferred option would be a 328, but been offered a reasonably clean 140k mile 323 for £750.

What is the difference between 323 and 325, is it just the inlet manifold and diff ratio, or is there more to it than that. Would the ecu have a different map on it?

also diff wise, would an (non evo) e36 m3 3.14 lsd bolt straight on, if not, what would fit? (wouldn't really want a 2.93 as its mega long ratio)

cheers.

corvus

431 posts

183 months

Saturday 8th September 2012
quotequote all
orangesrule said:
Basically i am looking for a bit of cheap rwd fun, my preferred option would be a 328, but been offered a reasonably clean 140k mile 323 for £750.

What is the difference between 323 and 325, is it just the inlet manifold and diff ratio, or is there more to it than that. Would the ecu have a different map on it?

cheers.
The 323 is a 2.5 lump with the restricted inlet manifold to reduce power from 192 bhp to 170 bhp, but they gain a bit of torque. The block is alloy with nicasil liners that were prone to wear from high sulphur fuel - most of these should have been sorted now with steel liner blocks. The 325 had a good old iron block.

If you keep the cooling system in good condition, the 323 is a good durable car, but one overheat could render the block scrap. Apart from that, they're good machines, if not quite as quick as the 2.8's.

I have no idea about the diff.