Rolex Submariner lume
Discussion
Yes it will be Tritium. (My Sub is a 1994 and the same)
It "could" be re-lumed, and there are specialists in this, but the favourite/easiest method is to fit it with a new dial and hands, which would probably happen if you sent it back to Rolex, mentioning that you wanted luminescence.
This is not good for the value of the watch.
Better really to leave it, as it adds to the general patina/authenticity.
I know that there are a lot more knowledgeable people than me here on the forum, and someone will probably have a better suggestion, but this is what I've been led to believe will happen.
Do you really need to be able to see it at night? If so, I'd suggest a small bedside torch.
It "could" be re-lumed, and there are specialists in this, but the favourite/easiest method is to fit it with a new dial and hands, which would probably happen if you sent it back to Rolex, mentioning that you wanted luminescence.
This is not good for the value of the watch.
Better really to leave it, as it adds to the general patina/authenticity.
I know that there are a lot more knowledgeable people than me here on the forum, and someone will probably have a better suggestion, but this is what I've been led to believe will happen.
Do you really need to be able to see it at night? If so, I'd suggest a small bedside torch.

As mentioned above, you can have the dial replaced which would probably be the best method for retaining the authenticity and therefore value of the watch. If you do get the dial replaced for a newer superluminova part, you must insist that the service centre retains the old dial and sends it back to, or it will likely disappear.
A bit of background as to why your watch no longer glows, if you're interested:
Luminous paint has been used as early as the 18th Century for art, but its first practical usage was in 1902 with a mix of radium and other materials like zinc sulphide, and its usage on watch dials (and famously by Panerai on military equipment using their version of the paint known as 'Radiomir') became commonplace. Contrary to popular belief, it is not the radioactive material that glows (although radium in large quantities glows blue), it is the decaying radioactive isotopes exciting the zinc sulphide or equivalent (known as the radioluminescent substance)that emits the glow. Radium was, unsurprisingly, found to be very deadly, so tritium was used instead, releasing much less harmful beta radiation rather than the nasty gamma radiation of radium. The radioactivity of tritium in watch dials has since been limited by law to be no more than 25mCi (which gives us the 'T<25' marking on dials), and so is considered safe for use where radium-based paints were not.
A common mistruth about the decay of the glow in tritium paint is that it is caused by the short half life of 12 years. Tritium based paint can continue to glow well beyond its half life (although it will become increasingly dim), and it is in fact the breakdown of the photoluminescent material that causes the glow to cease (and turn the lume a nice creamy colour).
A bit of background as to why your watch no longer glows, if you're interested:
Luminous paint has been used as early as the 18th Century for art, but its first practical usage was in 1902 with a mix of radium and other materials like zinc sulphide, and its usage on watch dials (and famously by Panerai on military equipment using their version of the paint known as 'Radiomir') became commonplace. Contrary to popular belief, it is not the radioactive material that glows (although radium in large quantities glows blue), it is the decaying radioactive isotopes exciting the zinc sulphide or equivalent (known as the radioluminescent substance)that emits the glow. Radium was, unsurprisingly, found to be very deadly, so tritium was used instead, releasing much less harmful beta radiation rather than the nasty gamma radiation of radium. The radioactivity of tritium in watch dials has since been limited by law to be no more than 25mCi (which gives us the 'T<25' marking on dials), and so is considered safe for use where radium-based paints were not.
A common mistruth about the decay of the glow in tritium paint is that it is caused by the short half life of 12 years. Tritium based paint can continue to glow well beyond its half life (although it will become increasingly dim), and it is in fact the breakdown of the photoluminescent material that causes the glow to cease (and turn the lume a nice creamy colour).
Rolex will NOT return a dial if they replace your original one. They will charge you for a replacement and keep the original. No amount of wheedling or begging will get it returned. They will also need to replace the current hand set. So you're losing both the original dial and original hands.
Rolex moved from Tritium to Luminova in 1998, then superluminova in 2000.
Retaining the original dial for most people would be far more valuable than having functional lume. But this is up to you.
Rolex moved from Tritium to Luminova in 1998, then superluminova in 2000.
Retaining the original dial for most people would be far more valuable than having functional lume. But this is up to you.
RichTT said:
Rolex will NOT return a dial if they replace your original one. They will charge you for a replacement and keep the original. No amount of wheedling or begging will get it returned. They will also need to replace the current hand set. So you're losing both the original dial and original hands.
Rolex moved from Tritium to Luminova in 1998, then superluminova in 2000.
Retaining the original dial for most people would be far more valuable than having functional lume. But this is up to you.
Indeed. I am keeping an eye out for several vintage Rolex models at the moment. Dealbreaker is a service dial(or later variant) without swiss T 25 on the bottom. Tritium looks amazing when it has aged (as does radium)- luminova is just is not the same in my personal opinion. All down to personal preference though- some hate the aged look and want it to look as new,in which case a service dial would be the way to go.Rolex moved from Tritium to Luminova in 1998, then superluminova in 2000.
Retaining the original dial for most people would be far more valuable than having functional lume. But this is up to you.
Edited by GCH on Saturday 15th September 16:50
Vvroom said:
Is that what Ball use?
Who else and how large are these 'tubes'?
Traser, Luminox (Which are great for work), Deep Blue have just released a tritium tube model called the Daynight Recon T-100 Trituim and some Reactor watches use a combination of both superluminova and tritium tubes for their watches.Who else and how large are these 'tubes'?
As a Night Trunk driver I need watches that are easy to read and can take a bit a punishment as they are always getting knocked when doing up the curtains of the truck. Luminox have ticked the boxes for me in fact I have two now.
GCH said:
Indeed. I am keeping an eye out for several vintage Rolex models at the moment. Dealbreaker is a service dial(or later variant) without swiss T 25 on the bottom. Tritium looks amazing when it has aged (as does radium)- luminova is just is not the same in my personal opinion. All down to personal preference though- some hate the aged look and want it to look as new,in which case a service dial would be the way to go.
I might be completely wrong here but I think the dials that said Swiss T 25 were the original dials and the ones that just said Swiss were the service replacement dials?Edited by GCH on Saturday 15th September 16:50
My experience comes from reading about a 5513 I have my eye on.
Gassing Station | Watches | Top of Page | What's New | My Stuff


