e46(330ci) Fault Code Reading Question
e46(330ci) Fault Code Reading Question
Author
Discussion

wlk

Original Poster:

24 posts

175 months

Friday 14th September 2012
quotequote all
Hi,

So the other morning my ABS/DSC/Brake Light came up on the dash so I started "googling" to get an idea of possible faults. Ordered a code reader and fired it up with the laptop this afternoon, sure enough 1 fault code which is "P0500 - Vehicle Speed Sensor Malfunction". Now my reader has an option to clear codes so I thought I would do this and see if it reoccurred (apparently this fault can be intermittent), the code cleared successfully (and so far hasn't reappeared) but the lights on my dash still remain, is this normal?

Do I need to do something else to reset the lights or is this in itself indicative that the fault remains? Probably going to end up taking it to a garage Tuesday anyway but I'd rather avoid the 45min journey each way if I can self diagnose or confirm it is just intermittent.

Thanks,

Ben

TheEnd

15,370 posts

219 months

Friday 14th September 2012
quotequote all
The code you read and cleared is from the engine ECU, the ABS lights are on from the ABS ecu.

It's likely to be a rear wheel ABS sensor that needs replacing. You may also find you have a new lower rev limit somewhere near 5000rpm when the speed signal is missing.

wlk

Original Poster:

24 posts

175 months

Friday 14th September 2012
quotequote all
Thanks, I'll get it booked in for proper diagnostics next week then.