G50/52 CV Boot Replacement

[2001ultima]

I have a G50/52. The CV boot near the transaxle has a crack. Does any one know if I can order the CV boot kit from a local automotive for a 91-94 Porsche 911 Turbo? Looks like the kit includes the boot, clamp, ring and greese.

Also, do I have to remove the whole axle or can I unbolt one side from the transaxle to replace the boot?

[Steve_D]

I suspect you will have Ultima drive shafts which will have GKN CV joints. GKN or the Factory will be your source for replacements.
I doubt standard porker ones will be correct.

Steve

[2001ultima]

I checked and you are correct, GNK. One side had a boot like the Build CD displays and the side that cracked is a cheaper boot that is clamped on to the fixture that bolts to the CV.

I did some searching and located this part. I will order it and try it.

I have an even this weekend and need to get this fixed quick.

https://www.pegasusautoracing.com/productdetails.a...

[macgtech]

We have a few of these and could have sent one to you, but we are away at Silverstone until Monday which will be a little late for you I suspect. If you get stuck and haven't had any luck by next week let us know.

[2001ultima]

The Aero boot arrived. It is installed a worked well.