Omega Seamaster Pro problem
Discussion
I'm after a bit of advice gents.
I've had my Seamaster since around 2001, it's the chronograph Seamaster Pro Auto.
I've had it serviced once in that time (I know I've been naughty) and it's been faultless until halfway through holiday when it stopped overnight a couple of times, in both cases pulling the crown out to reset the time restarted it, but unscrewing the crown to do so felt stiff and a bit rough.
When I got back it was absolutely fine though till a couple of nights ago and it's happened again and again the night after. I've stopped wearing it now for fear of damaging it, any ideas what the problem might be?
Also who is cheap and decent for a service, I've been quoted £250-300 for a service by a local Rolex specialist and nearly had heart failure.
I've had my Seamaster since around 2001, it's the chronograph Seamaster Pro Auto.
I've had it serviced once in that time (I know I've been naughty) and it's been faultless until halfway through holiday when it stopped overnight a couple of times, in both cases pulling the crown out to reset the time restarted it, but unscrewing the crown to do so felt stiff and a bit rough.
When I got back it was absolutely fine though till a couple of nights ago and it's happened again and again the night after. I've stopped wearing it now for fear of damaging it, any ideas what the problem might be?
Also who is cheap and decent for a service, I've been quoted £250-300 for a service by a local Rolex specialist and nearly had heart failure.
That'll be about the right price for a service at anyone half decent I'm afraid 
I'd reccommend Genesis Watchmaking - www.genesiswatchmaking.co.uk - they're really, really good.

I'd reccommend Genesis Watchmaking - www.genesiswatchmaking.co.uk - they're really, really good.
When it stopped and you re-set the time did you manually wind the watch? Although it's an automatic movement, if it's wound down for some reason you'll need to actually wind it to get it going properly.
Unscrew the crown, and at the first position before pulling it out to adjust the date rotate it away from you about 20-30 times. You'll feel a slight resistance and hear a faint clicking.
Try this and see if it makes any difference. If it still doesn't keep it's charge while being worn then it'll need a service.
Unscrew the crown, and at the first position before pulling it out to adjust the date rotate it away from you about 20-30 times. You'll feel a slight resistance and hear a faint clicking.
Try this and see if it makes any difference. If it still doesn't keep it's charge while being worn then it'll need a service.
No not really, but I don't expect to pay 2k for a watch and have it develop a problem sooner than a £25 sekonda and cost several hundred to make it work properly again.
By the same token I wouldn't expect to buy a BMW and the engine to fall out at 70mph on the motorway when it hit 6 years old.
By the same token I wouldn't expect to buy a BMW and the engine to fall out at 70mph on the motorway when it hit 6 years old.
wildoliver said:
No not really, but I don't expect to pay 2k for a watch and have it develop a problem sooner than a £25 sekonda and cost several hundred to make it work properly again.
By the same token I wouldn't expect to buy a BMW and the engine to fall out at 70mph on the motorway when it hit 6 years old.
The problem is that mechanical watches are not the 'BMW', they are a 1906 steam car, i.e. obsolete technology that is expensive to buy and expensive to keep on the road. The £25 quartz watch is the modern technology, easy to live with and reliable. However, we all still love the old technology for some reason. I wish I didn't... By the same token I wouldn't expect to buy a BMW and the engine to fall out at 70mph on the motorway when it hit 6 years old.

Gassing Station | Watches | Top of Page | What's New | My Stuff


