£500 watch to replace my Sinn
£500 watch to replace my Sinn
Author
Discussion

scoobysnacks

Original Poster:

18 posts

258 months

Sunday 23rd September 2012
quotequote all
I recently dropped my Sinn 556 and it works no more. Quoted £220 to fix inc a new official strap so considering my options.

I found this http://dailywatchdeals.co.uk/beaverbrooks-watch-sa... for £495. I think it looks the part and looks like its worth a lot more. Not sure about the Gucci brand for watches.

Will I miss my Sinn? I will miss not having an auto watch but then again wont need adjusting now and again and I now know I'll never buy a watch with a leather strap again.

huytonman

341 posts

225 months

Sunday 23rd September 2012
quotequote all
Have you tried getting a quote from somebody like Rytetime? Stephen Burrage offers excellent value and does great work - probably much cheaper than what you have been quoted. As for Gucci...Sinn make watches and nothing else and have done for decades...Gucci make handbags too..I know what I would do. if you decide to go with the Gucci drop me a line and maybe we can do a deal on the Sinn, it shouldnt be left it a drawer unused.
Keith

Motorrad

6,811 posts

218 months

Sunday 23rd September 2012
quotequote all
A 556 would look great on a 10 quid nato strap so minus that off you list. I'd rather own a broken sinn than wear a generic, overpriced POS like the watch you mentioned.

Seiko do some pretty nice watches for less than the 500 quid you mention as do 'Precista' aka TimeFactors......

http://www.timefactors.com/precista.htm

Spice_Weasel

2,369 posts

284 months

Sunday 23rd September 2012
quotequote all
Absolutely the best thing is to get it serviced/repaired at Rytetime. Before you send it, order a Seiko SKX007 from Creation to wear as an interim watch and to wear as a beater in the future.

Job done and total cost no more than £200

£295 cash saved along with much Gucci related embarrassment.

CardShark

4,264 posts

210 months

Sunday 23rd September 2012
quotequote all
Spice_Weasel said:
Absolutely the best thing is to get it serviced/repaired at Rytetime. Before you send it, order a Seiko SKX007 from Creation to wear as an interim watch and to wear as a beater in the future.

Job done and total cost no more than £200

£295 cash saved along with much Gucci related embarrassment.
This.

Podie

46,649 posts

306 months

Sunday 23rd September 2012
quotequote all
CardShark said:
Spice_Weasel said:
Absolutely the best thing is to get it serviced/repaired at Rytetime. Before you send it, order a Seiko SKX007 from Creation to wear as an interim watch and to wear as a beater in the future.

Job done and total cost no more than £200

£295 cash saved along with much Gucci related embarrassment.
This.
I'm with the Weasel and the shark.

Hoofy

80,180 posts

313 months

Sunday 23rd September 2012
quotequote all
What they said!

Chicane-UK

3,861 posts

216 months

Monday 24th September 2012
quotequote all
If you decide you can't be bothered with getting the Sinn 556 fixed, I'd happily take it off your hands (and pay to get it sent off and fixed) for a fair price. Fancied one of them for ages!

Let me know!

Edited by Chicane-UK on Monday 24th September 10:28

thegman

1,928 posts

235 months

Monday 24th September 2012
quotequote all
Hmm. Have been thinking about getting a Sinn but this doesnt seem like a glowing recommendation - so much for submarine grade steel if you drop it and it breaks?! Any other similar experiences? Are they fragile?

andy_s

19,857 posts

290 months

Monday 24th September 2012
quotequote all
thegman said:
Hmm. Have been thinking about getting a Sinn but this doesnt seem like a glowing recommendation - so much for submarine grade steel if you drop it and it breaks?! Any other similar experiences? Are they fragile?
The 556 doesn't use submarine steel, but this is irrelevant anyway in this case; the movement is an automatic ETA 2824 (iirc) and it is here where the problem lies. Pretty much all mechanical watches will be susceptible to breakage if dropped regardless of any hardening of the outer shell. A few watches have 'shock absorption' built in to the case to assist in protecting the movement - Bremont for example, but otherwise 'shock resistance' in relation to mechanical watches refers to a sprung loaded system which protects to some degree the bearings on the balance wheel. This helps protect this delicate part of the mechanism but it is an assist rather than an all out 'anti-shock' system. Sometimes you'll be lucky, other times you won't be - as per the OP.

Here's an extract from the ISO: "Specifies the minimum requirements and describes the corresponding method of test. It is intended to allow homologation tests rather than the individual control of all watches of a production of a production batch. It is based on the simulation of the shock received by a watch on falling accidentally from a height of 1 m on to a horizontal hardwood surface."

So no; Sinn watches are no more or less fragile than other automatic mechanical watches - they are the same. However Sinn (along with others like Damasko) do offer some of their watches with a hardened outer layer of the case which helps prevent scratches.

As others have suggested, I'd be looking at getting it looked at by an independent and keeping it unless you fancy a change, in which case get it looked at by an independent and sell it to one of the many people that would be interested.

Edited by andy_s on Monday 24th September 10:19

scoobysnacks

Original Poster:

18 posts

258 months

Monday 24th September 2012
quotequote all
Just to clarify I was very happy with my Sinn. It's 4 years old and over that time has taken a beating, including 2 years backpacking. The case and glass show no signs of any wear or damage. I dropped it from a hieght of about 1m onto a marble floor so I wasn't shocked to see the pendulum had fallen off.

The £220 quoted includes £85 for an official strap so if I go for a cheaper one, it is very viable to repair. Sorry guys not looking to sell it as if I don't fix it now, I will do in the future. I will check out Rytetime too.

Will keep you posted with what, if anything I replace it with.

scoobysnacks

Original Poster:

18 posts

258 months

Monday 8th October 2012
quotequote all
Just to keep you posted, I have replaced my Sinn with a Golana Advanced AD200 with a 7750 valjoux movement http://www.amazon.co.uk/gp/product/B004BLII4Y/ref=... I thought I would regret not sticking to an auto.

List price is a dubious £1300 but paid £260 on Amazon so enough to fix the sinn when I get round to it. I think that deals site is NWS (Not Wallet Safe). There's one on ebay for £400 with a day to go, so I think I've done well. Will post the obligatory picture on the wristcheck when it arrives smile

ApexJimi

27,797 posts

274 months

Monday 8th October 2012
quotequote all
Jings, this is some ballsed-up logic.

You didn't want to spend the money getting the Sinn repaired, yet you've spent MORE than the cost of the repair on that thing (sorry!) above?!

Yer no ticht!



Edited by ApexJimi on Monday 8th October 18:41

horacethefrog

424 posts

244 months

Monday 8th October 2012
quotequote all
Don't they make breakfast cereal? nuts