E46 325 heater / air con issue (with a twist!)
E46 325 heater / air con issue (with a twist!)
Author
Discussion

Refined Detail

Original Poster:

369 posts

211 months

Thursday 27th September 2012
quotequote all
Wondering if anybody can help me? If not, if you could at least point me in the direction of the 'best' E46 forum please - E46 fanatics have ignored a copy of this thread for nearly 2 weeks! frown

Basically I have an issue with my 2002 325 CI; the blower fan doesn't work. I bought the car recently with the fans not working, but I naively thought it was just going to be a blown fuse so didn't let that put me off the purchase.

I have changed the following so far:

Final Stage Resistor
Blower fan (what an absolute PITA job!)
HVAC controller (ie. digital display)
Checked all fuses & relays
Tried the 'pull fuse 50 trick'

The air con works as I can hear the compressor kick in, and I get air forced in whilst on the move that is chilled (or heated when I alter the temperature to warm) but I can not get the fan to turn on or alter when I turn it up / down.

A friend who helped me fit the blower fan tested power to the plug and it doesn't appear to be getting any power - this is the plug on the bulkhead that the blower heater connects to that I'm referring to.

I can also move all the flaps for recirculation etc etc (have seen them work, and also can hear them moving when their corresponding buttons are pushed)

All fuses appear to be ok, although fuse 28 (I think off the top of my head!) only appears to have 1 metal contact in the fuse box -the other blade of the fuse plugs into plastic - is this how it should be? I notice a few other fuse sockets in the fuse box are the same as this...

The only other thing I was told is that the HVAC controller (digital display) needs to be coded to the car, but everything else I read said it was plug & play - and it seems to be as everything seems to function.

This issue is driving me insane now and getting very expensive, very quickly! It's also getting to the time of the year where I need the heater to work and also for the fans to work to clear the windscreen when it's misted up!

Any thoughts, advice etc would be much appreciated.

Many thanks,
Rich

markc123

50 posts

189 months

Thursday 27th September 2012
quotequote all
Fuse 50 looks to be the live to the Final Stage resistor. Check this, and then check you have +12v at the appropriate pin in final stage plug when the car / climate control is on.

http://wds.spaghetticoder.org/en/zinfo/E46_PN2A.ht... is the wiring assignments in the plug to do this.

http://wds.spaghetticoder.org/en/svg/sp/SP00000135... is the wiring diagram - it looks like the final stage takes a live, earth, and a signal from the control module. Then it has 2 wires which supply power and earth to the blower motor. You can check the continuity of the motor circuit, the earth and the live. I'm not sure what the signal wire is - I doubt its canbus so probably a 0-12v signal - I'd probably test this by metering it for voltage while changing the fan setting. If there is nothing at the final stage, meter it at the connector at the back of the heater controls.

I'm assuming the car had climate control to start with?

It does all point to the final stage, did you replace with new? From what I can tell its a simple signal amp which takes the variable input from the control unit and amplifies the current to supply the motor.

Edited by markc123 on Thursday 27th September 10:08

Refined Detail

Original Poster:

369 posts

211 months

Thursday 27th September 2012
quotequote all
Thank you for the quick reply, much appreciated.

Re. the specifics of the car - it's a 2002 E46 Auto 325 Coupe with M54 engine.

I will have to enroll the assistance of a friend who is a little more technically minded to help me test all of that I think!!

As far as I am aware the car had climate from factory, I don't have an original build sheet in the history, but by checking the car using the VIN on real OEM it does pull up all the 'right' components from what I can see. Yes the FSR was replaced with a new OEM one (latest triangular revision too) although that said, since I've started replacing components, both this and the HVAC controller appear to have been replaced in the past indicating this could be the reason the previous owner kept quiet and sold it mad

The location of the FSR is difficult to photograph, but whoever replaced it previously did a cowboy job as it's mashed back into position and the mounting plastic is broken, but from what I can see the plug is still ok - I will check this for power though.

buggalugs

9,297 posts

268 months

Thursday 27th September 2012
quotequote all
Refined Detail said:
Thank you for the quick reply, much appreciated.

Re. the specifics of the car - it's a 2002 E46 Auto 325 Coupe with M54 engine.

I will have to enroll the assistance of a friend who is a little more technically minded to help me test all of that I think!!

As far as I am aware the car had climate from factory, I don't have an original build sheet in the history, but by checking the car using the VIN on real OEM it does pull up all the 'right' components from what I can see. Yes the FSR was replaced with a new OEM one (latest triangular revision too) although that said, since I've started replacing components, both this and the HVAC controller appear to have been replaced in the past indicating this could be the reason the previous owner kept quiet and sold it mad

The location of the FSR is difficult to photograph, but whoever replaced it previously did a cowboy job as it's mashed back into position and the mounting plastic is broken, but from what I can see the plug is still ok - I will check this for power though.
You can diag the air system using INPA and an ebay lead, run tests, pull codes, well worth the £30 or whatever on ebay.

Refined Detail

Original Poster:

369 posts

211 months

Thursday 27th September 2012
quotequote all
Is INPA the software that allows you to also code minor things like auto folding mirrors, welcome lights and all the other 'gimmicky' little bits?

I found the leads before but wasn't sure where was best to buy or 'obtain' the software from...

Scrap that, have ordered this: http://www.ebay.co.uk/itm/BMW-USB-Diagnostics-OBD-...

Edited by Refined Detail on Thursday 27th September 18:12

helix402

7,913 posts

213 months

Thursday 27th September 2012
quotequote all
The a/c control unit needs coding to the car.

Refined Detail

Original Poster:

369 posts

211 months

Thursday 27th September 2012
quotequote all
helix402 said:
The a/c control unit needs coding to the car.
Is this definite? I was told this by an ex BMW technician tbh, but everything I've read on the internet seems to indicate otherwise (people fitting the facelift version etc) Would I be able to do this using the software I've just ordered, or is that a dealer / specialist job only?

helix402

7,913 posts

213 months

Thursday 27th September 2012
quotequote all
I am a ex BMW Technician, if it's not coded to your car it may work correctly or it may not. SSS Progman should allow you to code the ecu. The software you have ordered should do the trick, though the older version of DIS (V44) has coding within it. Don't forget to connect a battery charger before coding.
Hope you get it sorted.

Refined Detail

Original Poster:

369 posts

211 months

Thursday 27th September 2012
quotequote all
Perfect! Thank you very much! This gives me a lot more hope!

If I am unable to figure how to code it myself, do you happen to be remotely local to Petworth (West Sussex) would be more than happy to travel and pay for your time!

helix402

7,913 posts

213 months

Thursday 27th September 2012
quotequote all
I used to be nearish to Petworth (Woking), but now live in Dorset.