Aftermarket watch strap help please
Aftermarket watch strap help please
Author
Discussion

blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
Hello, I touched upon this before so sorry for the semi-repost.
My watch straps are lasting me a year to 18 months and Im sick of it as £300+ each time is getting boring.
A couple of aftermarket companies were recommended. Toshi springs to mind. Unfortunately they can't help[ because my watch straps are non-standard size.
Its best to show the problem with a picture:



If you can see the lug, you should be able to see that the whole strap doesnt fit betweeen it, rather a little thin piece juts out and goes between the lugs.
As a result places like Toshi say they cant help because theyh just make a range of standard fit-all straps.

Any other suggestions?

Thanks

andy_s

19,857 posts

290 months

Tuesday 2nd October 2012
quotequote all
http://www.abp-paris.com/ulysse_nardin_watchbands_...

I think ABP come out around Eu60 - to Eu 140-ish, but you can choose from a huge range of permutations.

Bizarrely they seem to sell Sinn now...

blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
andy_s said:
http://www.abp-paris.com/ulysse_nardin_watchbands_...

I think ABP come out around Eu60 - to Eu 140-ish, but you can choose from a huge range of permutations.

Bizarrely they seem to sell Sinn now...
Thanks Andy, I came across this site the other day, but I cant make head or tail of it and they dont seem to actually sell anything.
Am I being stupid?Edit: JUst looked again. I see it is possible but just a bit of a minefield. Ill have to phone them and ask "parlez vous anglais?" or Im buggered

Edited by blindswelledrat on Tuesday 2nd October 08:54

clockworks

7,814 posts

176 months

Tuesday 2nd October 2012
quotequote all
How about adapting a standard strap? Find one the right width, then slit the ends so that the central piece fits into the case cutout. Trim the sides (shave the back off the leather to make it thinner), and fold the excess underneath, glueing it in place. Superglue works very nicely on leather.
Buy a couple of cheap straps from Cousins to test the process, before spending more on a quality strap.

I've done similar things to shorten straps to fit deployent clasps, or to fit modern straps to old watches with fixed lugs (no spring bars). Just takes a steady hand and a sharp knife.

blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
I did think about that Clockwork, but given the brief, curt response I got from Toshi on the subject I assumed it must be harder than that. Plus, finally as I am approaching 40 I have accepted the fact that when I try to do anything at all whatsoever it goes wrong.

Mezzanine

10,580 posts

250 months

Tuesday 2nd October 2012
quotequote all
Nice watch.





blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
andy_s said:
http://www.abp-paris.com/ulysse_nardin_watchbands_...

I think ABP come out around Eu60 - to Eu 140-ish, but you can choose from a huge range of permutations.

Bizarrely they seem to sell Sinn now...
laugh
I just tried to create a similar aligator strap to the original and the cost was....... 360 euro. ALmost exactly teh same as an original
You can get some fantastic exotic leather on there though. Im quite tempted by a sturgeon strap.

andy_s

19,857 posts

290 months

Tuesday 2nd October 2012
quotequote all
blindswelledrat said:
Thanks Andy, I came across this site the other day, but I cant make head or tail of it and they dont seem to actually sell anything.
It is a shop in Paris, did you expect anything less? smile


blindswelledrat said:
I see it is possible but just a bit of a minefield. Ill have to phone them and ask "parlez vous anglais?" or Im buggered
It does look a right buggers muddle; best bet is probably email - have a general idea what you want in terms of material, thickness, length, finish, stitching etc and email them the make/model of watch for the lug detail.

Doubtless this will be met with a surly 'bof!', a Gallic shrug and hopefully some sort of reply...

ETA - Eu360!! yikes Oh well, apols for the bum-steer, but they do do some oneteresting ones as you've noted.




Edited by andy_s on Tuesday 2nd October 09:18

blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
Itgs still not a non starter, neccesarily. Oddly the exotic leather ones are 160 euro.
Example list:

Beaver tail
Toad
Frog
Stingray
Shark
Pangolin
Pararacu
Sturgeon
Cobra
Sea snake
etc

How are these half the proce of aligator, which I would think is pretty standard?
Still expensive but if I cant find any proper priced straps anywhere its worth a punt

blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
Mezzanine said:
Nice watch.
Thank you, I love it

bigandclever

14,418 posts

269 months

Tuesday 2nd October 2012
quotequote all
It's a shame Rich won't do it, he's definitely done non-standard before, though you had to send the watch to him.

Dominic H

3,289 posts

263 months

Tuesday 2nd October 2012
quotequote all
blindswelledrat said:
Itgs still not a non starter, neccesarily. Oddly the exotic leather ones are 160 euro.
Example list:

Beaver tail
Toad
Frog
Stingray
Cod
Pangolin
Care bear
Pararacu
Sturgeon
Nice fluffy bunny
etc

How are these half the proce of aligator, which I would think is pretty standard?
Still expensive but if I cant find any proper priced straps anywhere its worth a punt
Danger money, you tried catching one? wink

On a more serious note. Might you consider a bracelet? Likely to be a kings ransom, but better then >£300 pa....


blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
Dominic H said:
On a more serious note. Might you consider a bracelet? Likely to be a kings ransom, but better then >£300 pa....
Yes I have - I realise this is by far the most sensible option.
They just leave me totally cold. Purely opinion, but I love my watch and I think a steel bracelet transforms it into a dull generic garage watch.
Its tempting for eases sake, but then I might as well buy a £50 g-shock for how much I would like it.



See?

tertius

6,914 posts

261 months

Tuesday 2nd October 2012
quotequote all
The solution is obvious, I can't believe it hasn't been suggested already .... buy a new watch ...;)

Spice_Weasel

2,369 posts

284 months

Tuesday 2nd October 2012
quotequote all
^^Search your feelings, OP. You know it to be true.

Spoof

1,854 posts

246 months

Tuesday 2nd October 2012
quotequote all
abp get my vote, 5 months on and still looking like new, far higher quality than the IWC original.


HardWorkers

537 posts

241 months

Tuesday 2nd October 2012
quotequote all
I'd have a go at making one for you for free if you're interested.

I've made a few and want to start selling some but need more practice. I don't have any blue leather at the moment so for now it would probably be black or brown although I'm always on the look out for suitable bits of leather. If it works out OK I can source some suitable blue beaver skin or something!

If you want me to have a go - no obligation, just send it back if you don't like it or keep it if you do - let me know. I'll need some measurements but it doesn't look to tricky to me.

Here are a few I've made:


blindswelledrat

Original Poster:

25,257 posts

263 months

Tuesday 2nd October 2012
quotequote all
That would be excellent. The only drawback is that that other site suggested has given me the horn for getting a strap made from 'exotic' leather.
Perhaps if I hunted around and tried to source some material for you to make it for me?

Vvroom

1,170 posts

221 months

Tuesday 2nd October 2012
quotequote all
HardWorkers said:
I'd have a go at making one for you for free if you're interested.

I've made a few and want to start selling some but need more practice. I don't have any blue leather at the moment so for now it would probably be black or brown although I'm always on the look out for suitable bits of leather. If it works out OK I can source some suitable blue beaver skin or something!

If you want me to have a go - no obligation, just send it back if you don't like it or keep it if you do - let me know. I'll need some measurements but it doesn't look to tricky to me.

Here are a few I've made:

Top man, well done. Really like the brown leather strap in the pilot's watch (second from bottom)

GALLARDOGUY

8,160 posts

250 months

Tuesday 2nd October 2012
quotequote all
I use this guy. He can do anything you request and I've been very happy with everything he's done for me.

Some unusual materials too.

http://www.combat-straps.com/