calling adam Q
Discussion
Hmm - creating a following already...
Start off reading up this lot (from the FAQ):
Section for superchargers and turbos (and Nitrous if you're a bit mental)
SX Technical Information
help with psi boost gauge
Supercharging a 350 V8
Twin Sprintex
SX Water Pump Problem
Mr Gun Metal - are you aiming for a faithful replica of the Haughins/Priddle Spintex installation, or a similar one, still Sprintex-based, or just a blower set up (don't care about the exact layout but want it blown?)
In any case a good starting point would be a permanent search on Ebay for an ex-Range Rover Sprintex setup. See if you can geet the ECU too. Failing that any Sprintex S102 would be a start. Is your donor vehicle a flapper or hotwire?
Start off reading up this lot (from the FAQ):
Section for superchargers and turbos (and Nitrous if you're a bit mental)
SX Technical Information
help with psi boost gauge
Supercharging a 350 V8
Twin Sprintex
SX Water Pump Problem
Mr Gun Metal - are you aiming for a faithful replica of the Haughins/Priddle Spintex installation, or a similar one, still Sprintex-based, or just a blower set up (don't care about the exact layout but want it blown?)
In any case a good starting point would be a permanent search on Ebay for an ex-Range Rover Sprintex setup. See if you can geet the ECU too. Failing that any Sprintex S102 would be a start. Is your donor vehicle a flapper or hotwire?
Well Corno, there's an S102 on mine like all the others that Dennis Priddle did through Haughins in 1989. So if you want to go original you should go for that.
Zig spotted one on ebay the other day:
Linky
Looking at the pics this looks fairly complete and will save you a lot of hassle in getting the brackets and pipework you will need all together. You might even be able to put it on yourself!
I would make him an offer and pick it up on the same trip....
Zig spotted one on ebay the other day:
Linky
Looking at the pics this looks fairly complete and will save you a lot of hassle in getting the brackets and pipework you will need all together. You might even be able to put it on yourself!
I would make him an offer and pick it up on the same trip....
adam quantrill said:
Well Corno, there's an S102 on mine like all the others that Dennis Priddle did through Haughins in 1989. So if you want to go original you should go for that.
Zig spotted one on ebay the other day:
Linky
Looking at the pics this looks fairly complete and will save you a lot of hassle in getting the brackets and pipework you will need all together. You might even be able to put it on yourself!
I would make him an offer and pick it up on the same trip....
Hi Adam,Zig spotted one on ebay the other day:
Linky
Looking at the pics this looks fairly complete and will save you a lot of hassle in getting the brackets and pipework you will need all together. You might even be able to put it on yourself!
I would make him an offer and pick it up on the same trip....
The bloke is located in Manchester and we go maybe to swansea for the blue one.
Do u think all the parts are into the deal?
Gassing Station | Wedges | Top of Page | What's New | My Stuff



