X5 Engine Mounting
X5 Engine Mounting
Author
Discussion

blackberry

Original Poster:

17 posts

215 months

Thursday 18th October 2012
quotequote all
I have an E53 X5 petrol. Had a major problem with one side of the engine leaning over onto drive shaft. The garage lowered the engine block to find that 3 of the bolts had come loose from the engine block bracket and one had sheared off completely. They have heli coiled 3 of them.

The finished job is good and drives fine but would appreciate any expert opinions on how long can the repair last?

StuB

6,695 posts

270 months

Friday 19th October 2012
quotequote all
As an ex aerospace engineer (engines & airframes), provided they used good quality helicoils and bolts of the appropriate strength properties (high shear) the repair could be as good if not better than OE. If you trust the garage to not use plain steel bolts & cheap self locking nuts.....

I would recommend you make a point of checking after a few miles and then ask at each service interval for an quick inspection. This has to be quite an unusual failure, but may indicate some previous accident damage to your car, which has weakened the mounts/bolts? Engine mountings/bolts should not fail!

LeoSayer

7,865 posts

275 months

Friday 19th October 2012
quotequote all
Maybe the engine has been previously removed and the bolts retightened with too much torque.