Boot release
Boot release
Author
Discussion

jeffo

Original Poster:

39 posts

266 months

Saturday 28th August 2004
quotequote all
G'day all

Help!

I've caught the dreaded faulty boot release 'lergy.

Naturally I have less than 1/4 tank of fuel left, my bible is still on order, and the owner's manual is in...that's right...the boot.

Would somebody be kind enough to email me the secret to getting it open?

I am hearing a click from the rear when I press the button, but it won't release. Multiple presses of the button don't seem to help.

Cheers
J

billynomates

2,101 posts

265 months

Saturday 28th August 2004
quotequote all
Mark YHM.

m4rk

330 posts

269 months

Saturday 28th August 2004
quotequote all
I have opened the boot without using the release button but posting how to do it here is a security risk. Please leave your email address in my guestbook at the web site below and I'll get back to you. You can use the private guestbook if you don't want your post to be public.

Is this OTT ??

m4rk

www.markandlinda.co.uk

jeffo

Original Poster:

39 posts

266 months

Monday 30th August 2004
quotequote all
Thanks guys.

Solution emailed to me privately and boot is now open and tank full.

Next task is to work out how to fix the mechanism before locking it again.

Electrical components seem to be OK, but the spring and latch assembly had let go of the cable when I got it open, and I'm puzzled as to how to re-attach it. There is some funny-looking bit of metal attached to the end of the cable that appears to have been welded together to make it all work, but when I attach the return spring to it, it remains loose and not under tension (which doesn't seem right).

Bit of a mystery to this TVR inductee.

J

homer

38 posts

313 months

Tuesday 31st August 2004
quotequote all
jeffo, on folding back the lever cover, you should see if the cable from the solenoid passes through the opener lever. It is secured with a large washer with a screw in it. If this has worked loose, cable will not pull the lever when solenoid is actuated.
Assuming this screw-washer has fallen off, then a good fix would be to thread the cable back through the hole in the lever, and secure with a large electrical choc-box connector.
Good luck.

jeffo

Original Poster:

39 posts

266 months

Wednesday 1st September 2004
quotequote all
I think I get the picture now.

The funny-looking bit of metal attached to the cable must be the lever. This is no longer attached to the latch bracket.

I will attempt to reattach this when I get a minute to myself and see what happens.

Thanks Homer.

Cheers
J