Shed BMW 728i (E38)
Discussion
So, a few examples of 728's have caught my eye for less than a grand.
I'm aware of the pricey fuel tank issue, suspension bits n bobs and some cooling problems. Anything else?
I'm really tempted, probably the best looking 7-series they will ever make.
Anyone kind enough to share their experiences on shed-priced E38 ownership?
Thanks.
I'm aware of the pricey fuel tank issue, suspension bits n bobs and some cooling problems. Anything else?
I'm really tempted, probably the best looking 7-series they will ever make.
Anyone kind enough to share their experiences on shed-priced E38 ownership?
Thanks.
Its the 740 that really suffers from tank porosity.
I had a 728 individual for about 18 months and put over 30k on it (bought it at nearly 170k) and it was largely flawless outside of standard consumable items.
The one thing I would say is to check the gearbox. The usual 'sealed-for-life' nonsense means plenty of boxes are shuffling around on broken down, filthy oil. This can translate into notchy changes, reluctance to engage 1st/2nd after braking hard or losing drive on sustained inclines.
A change of oil will help a lot but it takes a fair effort to fully flush and refill as the torque converter holds a fair amount.
I had a 728 individual for about 18 months and put over 30k on it (bought it at nearly 170k) and it was largely flawless outside of standard consumable items.
The one thing I would say is to check the gearbox. The usual 'sealed-for-life' nonsense means plenty of boxes are shuffling around on broken down, filthy oil. This can translate into notchy changes, reluctance to engage 1st/2nd after braking hard or losing drive on sustained inclines.
A change of oil will help a lot but it takes a fair effort to fully flush and refill as the torque converter holds a fair amount.
Frances The Mute said:
Its the 740 that really suffers from tank porosity.
All E38's suffer from rusty tanks. For some reason known unto BMW only, they used steel rather than plastic even though the E34, E36 etc were using plastic tanks. The rust starts under the rather brittle epoxy coating and rots away - around the flange where the two halves join and there the rubber filler neck hose fits on.A new tank is around a grand.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



