Tag Monaco running too quick
Tag Monaco running too quick
Author
Discussion

fellatthefirst

Original Poster:

622 posts

186 months

Monday 5th November 2012
quotequote all
Over the weekend i noticed my Tag Monaco was showing the wrong time (about 1 hour ahead of actual time). I thought it was odd so reset the time. Later in the evening i noticed it was again about 30 mins ahead.

I timed a minute on it with a stopwatch and found it's actually running about 4 seconds a minute too quick?? Any ideas where i should take it to get fixed and what it might be?

Ev_

190 posts

294 months

Monday 5th November 2012
quotequote all
Might just need demagnetising if you're lucky.

clockworks

7,815 posts

176 months

Monday 5th November 2012
quotequote all
Can be several things:

Magnetised hairspring
Hairspring "hooked up" on balance cock or regulator
Mainspring run down - needs winding, or mainspring bridle slipping preventing full wind.
Problem with the train causing power loss.

Try winding it fully (until the clutch/bridle slips), then leave it off your wrist. If it runs for 40 hours give or take, you can rule out spring or train problems. If it runs for much less than 40 hours, it needs a service.
Get the watch degaussed at a shop, or buy a degaussing machine and do it yourself. Cheap enough on eBay or from Cousins.
Take the back off, and check that the hairspring isn't catching or hooked up. Best left to a watch repairer on a relatively expensive watch like this.

fellatthefirst

Original Poster:

622 posts

186 months

Monday 5th November 2012
quotequote all
Many thanks for your advice, i think i'll take it down to a local watch shop as it doesn't sound like something i could do as i have absolutely no experience in watch repair.

Miguel Alvarez

5,193 posts

201 months

Wednesday 7th November 2012
quotequote all
One of my watches did this randomly once and the next day it was fine (for years after).

fellatthefirst

Original Poster:

622 posts

186 months

Thursday 8th November 2012
quotequote all
I've booked it in for a service, hopefully that will sort it