E39 OBD access
E39 OBD access
Author
Discussion

BliarOut

Original Poster:

72,863 posts

270 months

Wednesday 7th November 2012
quotequote all
I've got an OBDII bluetooth reader and SW on my laptop but it looks like my '99 E39 only has the OBDI port in the engine bay.

Is there an OBDII port hidden anywhere on these if so, where?

Failing that does anyone have any recommendations for an OBDI > OBDII interface cable?

Output Flange

17,054 posts

242 months

Wednesday 7th November 2012
quotequote all
You'll only have the OBD1 port.

First Google result for a convertor is ::this::

mini1380cc

2,949 posts

202 months

Wednesday 7th November 2012
quotequote all
I remember it being in the cubby hole down by your right knee.

miniman

30,239 posts

293 months

Wednesday 7th November 2012
quotequote all
Correct, you need the adapter as posted above. However I'm not sure how useful more modern readers will be with the E39, pretty sure someone said recently that they didn't do much. You really need INPA / EDIABAS.

Targarama

14,792 posts

314 months

Wednesday 7th November 2012
quotequote all
Not sure which ODB flavour it is but my 2003 model has the port in the top of the cubby by the driver's right knee. Kind of looks like a SCART connector. I bought a cheap code reader/reset tool from Ebay and it works just fine. Not sure about doing more complicated stuff though...

BliarOut

Original Poster:

72,863 posts

270 months

Wednesday 7th November 2012
quotequote all
Thanks thumbup

I'm only interested in resetting the service light after an oil change so I don't need a great deal of functionality smile

miniman

30,239 posts

293 months

Wednesday 7th November 2012
quotequote all
BliarOut said:
Thanks thumbup

I'm only interested in resetting the service light after an oil change so I don't need a great deal of functionality smile
http://m.youtube.com/#/watch?v=ilBadDCJuN4&desktop_uri=%2Fwatch%3Fv%3DilBadDCJuN4&gl=GB

or

Get in the car, close the door, buckle the seatbelt.
Push in the clutch pedal and hold it to the floor
Press the left hand dash button (the one that resets your odometer) and hold it down
Put the ignition key in the key slot, and turn it gently (very gently) until the dashboard lights come on - the key will not click - if it clicks you've gone too far and you have to start again. Hold the key in this position. In five seconds or so, the dash will display "SIA" and some other characters. Do not proceed until this happens.
Release the dash button (and only the dashboard button) and then press and hold it again. In another 5 seconds or so the display should begin to flash "RESET?" Do not proceed until this happens.
Release the dash button and push it again to confirm. You won't need to hold it - the display should change immediately and your service indicator will display five green LED's.

whistle

Edited by miniman on Wednesday 7th November 15:47

BliarOut

Original Poster:

72,863 posts

270 months

Wednesday 7th November 2012
quotequote all
thumbup That's even cheaper than an adapter cable biggrin

Targarama

14,792 posts

314 months

Wednesday 7th November 2012
quotequote all
What if you have an auto? no clutch to press?