BMW 320D Y reg - No Swirl Flaps
Discussion
Was at a mate's garage yesterday and he had got a customer in with a Y 320D, its got running problems basically not boosting properly and it had previously been diagnosed as sticky vein's on turbo, Anyway turbo was taken off and the turbo is fine, we next wondered if the swirl flaps where on way out, anyway removed manifold to have a look and we where shocked to see No swirl flaps at all, they havent been removed they where just never there
Anybody heard of this before? i dont know much about BMW's (im a VAG man) but i thought they all had them
Anybody heard of this before? i dont know much about BMW's (im a VAG man) but i thought they all had them
Edited by AndrewJB on Saturday 10th November 10:43
A Y plate 320d will be the original 136 bhp model that did not have swirl flaps - they were used on the 2001 facelift 150 bhp versions with both manual and auto transmissions.
Not going properly - could be a blocked catalyst, split vacuum pipe, sticky actuator, faulty pressure sensor, lazy fuel delivery pump or one of a million things. At least the 136 bhp engine was a good one and far better than the 150 bhp version.
Not going properly - could be a blocked catalyst, split vacuum pipe, sticky actuator, faulty pressure sensor, lazy fuel delivery pump or one of a million things. At least the 136 bhp engine was a good one and far better than the 150 bhp version.
iSore said:
A Y plate 320d will be the original 136 bhp model that did not have swirl flaps - they were used on the 2001 facelift 150 bhp versions with both manual and auto transmissions.
Not going properly - could be a blocked catalyst, split vacuum pipe, sticky actuator, faulty pressure sensor, lazy fuel delivery pump or one of a million things. At least the 136 bhp engine was a good one and far better than the 150 bhp version.
Why is the earlier engine better? I have a 150bhp Sport Touring and you have me wondering now!Not going properly - could be a blocked catalyst, split vacuum pipe, sticky actuator, faulty pressure sensor, lazy fuel delivery pump or one of a million things. At least the 136 bhp engine was a good one and far better than the 150 bhp version.
I have ripped the swirl flaps out of mine and can easily see how they can drop in, horrible flimsy little things with tiny screws retaining them.
They don't have any other problems as far as I know, they have the updated engine breather already.
Fox- said:
It's only better from a reliability point of view. It's less likely to go wrong.
Why though?Are you referring to the swirl flap issues, which both engines have or do you know of other problems?
I always thought that the earlier engines were more likely to wreck turbos because of the crappy breathers and this was addressed on the facelift model.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



