where to get these bits S2

[wadsapple]

Does anyone have an idea where i might get two of the little chrome surrounds i have the light please.....





I have the sockets that these go into on the bonnet catch system but not the spring arrangement again any help where to get.........





and lastly does anyone do the wheel centres or is it a case of making my own.........

[yodel]

Wheel centres, loads on ebay from various printers, mine were very good quality. Bonnet catches talk to Adrian@. I spoke to him about some but didnt need them in the end, just realigned bonnet.

[S1Vixen]

The chrome light surrounds are Royal Enfield pilot light surrounds? Type "Royal Enfield pilot lights" into eBay and you'll find them.

[Astacus]

wadsapple said:

Does anyone have an idea where i might get two of the little chrome surrounds i have the light please.....

I think This is what you are after (12)

http://www.hitchcocksmotorcycles.com/partsbooks/pa...

[phillpot]

Bonnet catches look like (slightly modified) Classic Mini ?

clicky and possibly many other Leyland cars of that era?

[wadsapple]

Thank you very much chaps.i,m now on the case very helpfull indeed

[tomtrout]

The bonnet catches are from a 105e Anglia.

[wadsapple]

Many thanx chaps the bits arrived spot on, was gob smacked the pilot lights were from a 1957 royal enfield bullet and they arrived today from India at a cost of £2.89 the pair via e-bay.As i say thanx for the heads up.Now off to find a DIY carpet set probably not on flee bay though.

[Moto]

Are these pilot lights standard fit on a S3? If so should they be clear or frosted glass as both are available.

[wadsapple]

Clear on the early S2 1970

[thegamekeeper]

The lens is clear but ribbed to diffuse the light. The idea with the positioning of the light is for it to shine upwards into the headlight illuminating it.



The downside to this was they filled with water and corroded the electrical connections and bulb holder.

Parts from the museum.

[thegamekeeper]

Original TVR Vixen wheel centres including some original factory uncut sheets