Decent BMW Code Reader
Decent BMW Code Reader
Author
Discussion

a1burns

Original Poster:

198 posts

179 months

Tuesday 20th November 2012
quotequote all
Ive got the common no DSC, lights and beep issue. I've had this before and it was low battery so the first thing I did was give the battery a charge (probably not a bad idea this time of year as I do a fair few short journeys) and it was nearly full anyway...

After some research found out its likely to be a wheel speed sensor. Tried to get these out at the weekend and couldn't even undo the bloody bolt! (didn't really do it properly just moved front wheels to full lock and couldn't get enough leverage) I've decided that instead of trying all 4 I'll make it easier for myself and get a code reader and see if I can find out which sensor I need to replace.

Anyone got any experience on a cheapish half decent code reader?

Car is a 05 E46 Coupe.

Thanks.

Salom

230 posts

207 months

Tuesday 20th November 2012
quotequote all
a1burns said:
Ive got the common no DSC, lights and beep issue. I've had this before and it was low battery so the first thing I did was give the battery a charge (probably not a bad idea this time of year as I do a fair few short journeys) and it was nearly full anyway...

After some research found out its likely to be a wheel speed sensor. Tried to get these out at the weekend and couldn't even undo the bloody bolt! (didn't really do it properly just moved front wheels to full lock and couldn't get enough leverage) I've decided that instead of trying all 4 I'll make it easier for myself and get a code reader and see if I can find out which sensor I need to replace.

Anyone got any experience on a cheapish half decent code reader?

Car is a 05 E46 Coupe.

Thanks.
I use this one,
http://www.ebay.co.uk/itm/Laptop-based-car-diagnos...

Install the software on your laptop and you can do real time analysis..

_Nathan_

506 posts

279 months

Tuesday 20th November 2012
quotequote all
Salom said:
I use this one,
http://www.ebay.co.uk/itm/Laptop-based-car-diagnos...

Install the software on your laptop and you can do real time analysis..
I doubt that will offer TC/ABS analysis.

OP - what you need is something like an Autel EU702.

They are around £150 on ebay or £72 on AliExpress



Jimbo666

53 posts

226 months

Tuesday 20th November 2012
quotequote all
Buy a K-CAN cable from Ebay and download versions of INPA and DIS which are the proper BMW diag software. It can be a pig to set up, but it's worth it. Theres plenty of guides on the net if you search.

stevesuk

1,377 posts

213 months

Wednesday 21st November 2012
quotequote all
I bought one of these:

http://www.ebay.co.uk/itm/BMW-USB-Diagnostics-OBD-...

(from that seller)

Comes with all the software Jimbo666 mentions above on a CD (also with detailed installation instructions).

Software is a pain to setup. To diagnose, you only need INPA (which makes life a bit easier). However, once setup, it works really well and enabled me to diagnose and clear an airbag system fault on my E46.

Quinten

1,172 posts

272 months

Wednesday 21st November 2012
quotequote all
I really recommend http://forums.m3cutters.co.uk/forumdisplay.php?f=7...

The software install is a couple of clicks (and a couple of hours waiting whilst it installs) and no messing with registry keys, etc

And the guy offers great support through the forums/email, even on Sundays/evenings

outnumbered

4,900 posts

265 months

Wednesday 21st November 2012
quotequote all
Quinten said:
I really recommend http://forums.m3cutters.co.uk/forumdisplay.php?f=7...

The software install is a couple of clicks (and a couple of hours waiting whilst it installs) and no messing with registry keys, etc

And the guy offers great support through the forums/email, even on Sundays/evenings
+1 one for this. It works very well, the s/w installation is totally straightforward, and the support is excellent.

BTW, I bought mine to diagnose exactly the same problem you have... I thought it would be a WSS but it turned out to be the ABS Sensor below the brake master cylinder.

a1burns

Original Poster:

198 posts

179 months

Wednesday 21st November 2012
quotequote all
outnumbered said:
Quinten said:
I really recommend http://forums.m3cutters.co.uk/forumdisplay.php?f=7...

The software install is a couple of clicks (and a couple of hours waiting whilst it installs) and no messing with registry keys, etc

And the guy offers great support through the forums/email, even on Sundays/evenings
+1 one for this. It works very well, the s/w installation is totally straightforward, and the support is excellent.

BTW, I bought mine to diagnose exactly the same problem you have... I thought it would be a WSS but it turned out to be the ABS Sensor below the brake master cylinder.
Have ordered this one today as it has programming features as well, any experience with that?

Thanks for the useful advise, Im under the impression its either the ABS Sensor below brake master cylinder, wheel speed sensor or steering position sensor, it was alerting constantly for a week and now its not doing it so much so think it might be mucky sensors...!