DIY - Metal Strap Refurb.
DIY - Metal Strap Refurb.
Author
Discussion

richwig83

Original Poster:

15,846 posts

169 months

Wednesday 28th November 2012
quotequote all




I forgot to take a before picture, but you know how they get. It was quite heavily scratched and was starting to look very tatty.

Took me about 10 minutes to vastly improve the appearance just by using a scotch bright and following the length of the watch strap. Its not 100% perfect, if i get time iI will refine it.

Rich

ps... sorry about the poor photos/ thumb print. :-)

Edited by richwig83 on Wednesday 28th November 01:01

Vvroom

1,170 posts

221 months

Wednesday 28th November 2012
quotequote all
You're a brave man!

Good results too so well done. Saved yourself a few quid there.

clockworks

7,817 posts

176 months

Wednesday 28th November 2012
quotequote all
Scotchbrite pads work wonders on brushed bracelets. You'll be doing the case next!

richwig83

Original Poster:

15,846 posts

169 months

Wednesday 28th November 2012
quotequote all
Ta chaps.

The case isn't bushed its polished.... And I'm not brave enough to attempt that! :-)

JAM35F

1,268 posts

283 months

Wednesday 28th November 2012
quotequote all
Is there any particular type of scotchbrite pad that works best? Are there different grades and where is the best place to get them?

Refurb looks great by the way, very impressed.

richwig83

Original Poster:

15,846 posts

169 months

Wednesday 28th November 2012
quotequote all
I just used one that was in a packet under the sink (clean an unused of course)

JAM35F

1,268 posts

283 months

Wednesday 28th November 2012
quotequote all
I searched the web and there were all types of grades available, I'll just use the standard one under the sink too then, cheers

richwig83

Original Poster:

15,846 posts

169 months

Wednesday 28th November 2012
quotequote all
I've got another watch to do. Ill do some before and afters if I can. It's a seiko kinetic relay.

clockworks

7,817 posts

176 months

Wednesday 28th November 2012
quotequote all
I use the standard green pads, too. For a softer brushed look, use a well-worn pad, or go over the strap with a paste metal polish like Solvol Autosol.

JAM35F

1,268 posts

283 months

Wednesday 28th November 2012
quotequote all
Be good to see before and after pics next time, I've a seiko that needs doing too but will try and find a broken bracelet to practice on.

Is it just light sweeps in one direction?

sparkyhx

4,200 posts

235 months

Wednesday 28th November 2012
quotequote all
I have a few things - you can pick up 3m paper with 30-1 micron for around a fiver.

I also have a few rouge blocks but dont actually know their micron level

also use a dremel with cloth lapping disks.

best results I have had have been from the dremel.

Mirror finish on stainless and gold rings, but not actually tried it on watches or straps yet as not needed to.

the stainless ring actually started off brushed, and the polished result was astonishing.

I have tried the papers and although the results were good, I was polishing a strap with a central polished band in between two brushed bands, the papers were a little inaccurate, and the final buffing just needed more effort, that I couldn't really put in cos of the accuracy needed.

I have used the papers on an old plastic crystal with excellent results (although scary when you take it down with the initial 30 micron polish)