Seiko Strap
Author
Discussion

37Flipper

Original Poster:

500 posts

216 months

Friday 30th November 2012
quotequote all
Hi all

I have just bought a new strap for my watch, but for the life of me I can't work out how to get the pin out to remove it. I thought it was just a case of pushing the pin through, but it will only move a couple of mm in each direction. I have searched on PH and the web, but I can't find any info. Can anyone help??


Eighteeteewhy

7,259 posts

199 months

Friday 30th November 2012
quotequote all
Watch pin removal tool.

YouTube is your friend.

clockworks

7,818 posts

176 months

Friday 30th November 2012
quotequote all
I've got one of those, in stainless, on a bracelet. Springbar tool should do the job.

Edit: Just got mine out of the safe to check. It uses a pin and collar to hold the strap to the case. If you look into the holes in the lugs, one side is a plain pin head with a dimple in the middle, the other end has a smaller head, with a thin tube around it. You need a bracelet pin remover with a long push pin, or a small bracelet punch and block. You need to push the pin out a certain way, and I can't remember which side to push.

The Seiko Monster uses the same method to hold the bracelet links together. Google should tell you how to remove links from a Monster. Make sure you don't lose the collar!

Edited by clockworks on Friday 30th November 20:18

37Flipper

Original Poster:

500 posts

216 months

Friday 30th November 2012
quotequote all
clockworks said:
I've got one of those, in stainless, on a bracelet. Springbar tool should do the job.

Edit: Just got mine out of the safe to check. It uses a pin and collar to hold the strap to the case. If you look into the holes in the lugs, one side is a plain pin head with a dimple in the middle, the other end has a smaller head, with a thin tube around it. You need a bracelet pin remover with a long push pin, or a small bracelet punch and block. You need to push the pin out a certain way, and I can't remember which side to push.

The Seiko Monster uses the same method to hold the bracelet links together. Google should tell you how to remove links from a Monster. Make sure you don't lose the collar!

Edited by clockworks on Friday 30th November 20:18
Excellent, thanks for that, 30 seconds on Google brings up this link.. Pin Removal

Dan_1981

18,129 posts

230 months

Friday 30th November 2012
quotequote all
Do not lose the collar.