Setting the minute hand on a SubC
Setting the minute hand on a SubC
Author
Discussion

longone

Original Poster:

252 posts

271 months

Sunday 2nd December 2012
quotequote all
Any thoughts about this.
I've had a SubC nearly two years, used everyday, works fine except when I have to reset the time or after a month change. Try as I might I can hardly ever get the minute hand to sit exactly on the hour marks when the second hand is at 12. It's always just behind or infront by a small amount. Occasionally I get it spot on but not often. I'm wondering is it backlash in the gear train or a lack of subtlety in the crown parts as it engages? I certainly don't remember my older Datejust doing the same. It really annoys, it should be dead easy but isn't.
Colin.

CardShark

4,264 posts

210 months

Sunday 2nd December 2012
quotequote all
I should think that it would be due to the "slack" in the mechanism and is perfectly normal. I find that if I manually wind my watches forward and then push the crown in it takes around 10-15 seconds before the minute hand starts to move again eg if (on a hacking mechanism where the second hand stops moving with the crown out) I stop the second hand dead on 12, wind the watch forward and leave the minute hand dead on a marker and then push the crown back in, the minute hand is a little behind the next marker when the second hand next passes 12.
The best way to get around this is to wind the minute hand back a touch after winding forward and then carefully push the crown back in, this should help take up the meshing slack of the mechanism and mean that the minute hand starts up straight away smile

You aren't the only one that isn't happy unless the second and minute hands are bang on, I'm the same nerdhehe

Edited by CardShark on Sunday 2nd December 15:55

longone

Original Poster:

252 posts

271 months

Sunday 2nd December 2012
quotequote all
ok cheers, it's a small thing but when you can't tell which minute it's referring to it makes a nonesense of the watch. My mates £10 quartz is exact. My recollection of a 1960 Oyster was it could be set bang on. Like you say that didn't hack so perhaps something in there. What surprises me is surely Rolex's top brass wear them and have the same problem, wouldn't you think they'd sort it?
Colin

longone

Original Poster:

252 posts

271 months

Sunday 2nd December 2012
quotequote all
I have to say, apart from this minor pedant thing I have with it, the watch is a great machine. Mine's been knocked about like mad, full of marks and scratches, worn doing things I really should've removed it for and it just keeps on going, dead accurate too. They truely are master engineers of a mass produced item.
Colin.