Discussion
Guys,
There are a handful of bolts I need to order in where the sizes haven't been quoted in the WiKi. Before I start rummaging through the pile of bits on my garage floor, I wonder if anyone knows the sizes to the following:
Diff
The bolts that attach the brackets to the front of the diff. IIRC these are M10 coarse socket head but how long are they? Also, although the diff holes are threaded, mine also had nylocs on the end... Are these just to stop it working loose?
Upper rear bracket to diff. M8 Socket head??? Again, what length are these?
Rear ARB brackets/clamps to chassis. M8? How long??
Rear Lower Wishbone. What is the thread on that front adjuster (just the simple threaded rod with the bush on the end)? Is it just a normal washer there or is there anything special?
Cheers,
M
There are a handful of bolts I need to order in where the sizes haven't been quoted in the WiKi. Before I start rummaging through the pile of bits on my garage floor, I wonder if anyone knows the sizes to the following:
Diff
The bolts that attach the brackets to the front of the diff. IIRC these are M10 coarse socket head but how long are they? Also, although the diff holes are threaded, mine also had nylocs on the end... Are these just to stop it working loose?
Upper rear bracket to diff. M8 Socket head??? Again, what length are these?
Rear ARB brackets/clamps to chassis. M8? How long??
Rear Lower Wishbone. What is the thread on that front adjuster (just the simple threaded rod with the bush on the end)? Is it just a normal washer there or is there anything special?
Cheers,
M
I was close... 
Diff
The diff front uses M12 x 30 Socket Head.
The rear bracket uses 2x M10x30 & 2x M10x40 Socket Head.
Rear ARB bracket uses 4x M6x25 with a pair of M6x15 on the other side.
The rear lower wishbone is still a mystery but it’s looking like an M12 with a fine pitch thread.
I’m off to update the bolt WiKi now...
M
Diff
The diff front uses M12 x 30 Socket Head.
The rear bracket uses 2x M10x30 & 2x M10x40 Socket Head.
Rear ARB bracket uses 4x M6x25 with a pair of M6x15 on the other side.
The rear lower wishbone is still a mystery but it’s looking like an M12 with a fine pitch thread.
I’m off to update the bolt WiKi now...
M
Tanguero said:
camel_landy said:
I was close...
The rear lower wishbone is still a mystery but it’s looking like an M12 with a fine pitch thread.
Which rear wishbone bolt? All the suspension bolts on mine were UNF The rear lower wishbone is still a mystery but it’s looking like an M12 with a fine pitch thread.
This thing:
M
Gassing Station | Cerbera | Top of Page | What's New | My Stuff