Discussion
Mark. said:
What are you having done?
As for suspension, I've got the Nitrons on mine and the ride is superb, glides over all but the really really rough stuff. I have GGP's on the Chimaera and while they are very good the Nitrons are another league altogether.
And they just look great....cant wait to get them on mine. As for suspension, I've got the Nitrons on mine and the ride is superb, glides over all but the really really rough stuff. I have GGP's on the Chimaera and while they are very good the Nitrons are another league altogether.
brakedust said:
They are very nice! How much for a set of those?
I'm having the engine rebuilt as something has gone at the bottom end (not sure what as of yet).
Nothing gone through the block so I'm hoping its just lower crank shells,
1,200 of your finest British pounds sir.I'm having the engine rebuilt as something has gone at the bottom end (not sure what as of yet).
Nothing gone through the block so I'm hoping its just lower crank shells,
Uprated the springs slightly, as APM's opinion is the standard are too soft, but many on here will have diff opinions about the ratings!
djstevec said:
1,200 of your finest British pounds sir.
Uprated the springs slightly, as APM's opinion is the standard are too soft, but many on here will have diff opinions about the ratings!
I'll be totally honest, what with a rebuild and Christmas that's out of my price range.Uprated the springs slightly, as APM's opinion is the standard are too soft, but many on here will have diff opinions about the ratings!
Any recommendations on the lower end of the scale? (search function is down at the mo)
I have nitrons on eibach springs I would really hold off for them if you can. I ran gaz on my old chim and hate them as well as failing on me within 50 miles out the box the ride was crashy. And that was with a geo set up. They also squeek over every bump.
Edited by scotty_d on Wednesday 5th December 10:22
djstevec said:
Whilst the engine is out, I'd also consider a pump refresh or at least upgrading the woodruff key to the drive shaft. Not sure if Andy does the woodruff key as a standard item, but I decided to strip & refurb the whole assembly.
I had woodruff key upgraded on my engine rebuild, im not sure whats involed in doing it, but its an upgrade worth having done IMO.Edited by djstevec on Wednesday 5th December 10:36
Djdan said:
Why have i never seen this going around Aberdeen 
I only moved up a few months ago so not been out in her much as been busy with the new job, you will be seeing much more of her in 2013!
Gray_101 said:
I had woodruff key upgraded on my engine rebuild, im not sure whats involed in doing it, but its an upgrade worth having done IMO.
How much extra was the upgrade on top of your standard rebuild?brakedust said:
Gray_101 said:
I had woodruff key upgraded on my engine rebuild, im not sure whats involed in doing it, but its an upgrade worth having done IMO.
How much extra was the upgrade on top of your standard rebuild?Gassing Station | Cerbera | Top of Page | What's New | My Stuff



You ok big man? What news on yours?
