JLC Reverso with no serial number? Advice please
JLC Reverso with no serial number? Advice please
Author
Discussion

8RT robert

Original Poster:

57 posts

264 months

Tuesday 18th December 2012
quotequote all
I am contemplating the purchase of a reverso, aparently the serial number was buffed off when it was being polished by the Jewller during a service? This seams very strange and suspicious.
Would there be a serial number inside the watch? The watch comes with all the papers so I would like to be able to match the watch to the paperwork.

ReaperCushions

7,607 posts

215 months

Tuesday 18th December 2012
quotequote all
Does the price reflect this rather dubious feature of the watch?

Just remember you'll have this issue as the seller when you next come to move it on

8RT robert

Original Poster:

57 posts

264 months

Tuesday 18th December 2012
quotequote all
I am happy with the price of the watch and have no plans to move it on. I have been looking for this particular model for a while. Just worried it may be stolen, would there be a number inside the watch?

Adrian W

15,623 posts

259 months

Tuesday 18th December 2012
quotequote all
Buffed off!!!! ....."...walk away quickly

lowndes

839 posts

245 months

Wednesday 19th December 2012
quotequote all
Some sound advice already offered above.

Here is a partial JLC serial number ( top left hand corner of photo), albeit not from a Reverso. It is quite deeply engraved into the metal and would not readily be removed with a bit of buffing and polishing. If someone has removed the serial number it will most likely have been done deliberately; for whatever reason one can only speculate.


Asterix

24,438 posts

259 months

Wednesday 19th December 2012
quotequote all
There is no way a serial number on a Reverso will 'Buff' Off' from a reasonable polish. Which Model is it?

If there is the correct paperwork, you'll have the serial number and retailer's details. they should be able to tell you the details of the watch etc...

I'd walk away.

Edited by Asterix on Wednesday 19th December 09:29

tertius

6,914 posts

261 months

Wednesday 19th December 2012
quotequote all
Looking at my Reverso Duo, the serial number is very lightly engraved on the case back. Mine is a good few years old now but the number is still extremely clear. I imagine these are typically only occasionally worn. I can imagine it would be possible to buff it out if you were over-enthusiastic with a polishing wheel.

Personally I would want to see the whole case back as there are a number of separate engravings on the back, and take a view on the condition of all of them and particularly was there any residual sign of the serial number.

8RT robert

Original Poster:

57 posts

264 months

Wednesday 19th December 2012
quotequote all
Many thanks for all your comments, i have since learnt that the number is there but is very faint but just readable. There is documentation to support the number on the watch. The model is a stainless steel Duetto.

Dominic H

3,289 posts

263 months

Wednesday 19th December 2012
quotequote all
I've also had a few Reverso which have had lightly engraved serial numbers. One was particularly feint following a valet by an experienced watchmaker, it was just legible with a loupe.
If you can agree the feint figures with the JLC paperwork you havethen there's no problem.

My 2c..

8RT robert

Original Poster:

57 posts

264 months

Wednesday 19th December 2012
quotequote all
Thanks Dominic when I heard the number had been buffed off alarm bells were ringing!!!