Mk1 Focus Door card removal
Discussion
its behind the winder not behind the door card, you need to create a gap between the door card and the winder then you will see the metal clip that needs to be pushed out. when you come to refit it, place the metal clip on to the winder then push the winder back on to the window mechanism.
^^ That's pretty much spot on advice. Here's a helpful pic to give you an idea of what you are looking for. It's an easy enough job. Try pushing in the door card and pull on the winder handle to create a gap. It may also help to rotate the winder until the top of the clip is more accessible from above.


Gassing Station | General Gassing | Top of Page | What's New | My Stuff



