2010 GT3 Factory suspension settings ?

[curley]

Can someone advise the above ?

Camber , Caster ,Toe etc

[LuckyP]

Your wish....


Front

Height front 102 +/- 2mm (road to lower edge of hex bolt on cross member to body).

Toe unpressed total 0' +/- 2'

Toe diff angle at 20 deg -1 deg 50 ' +/- 30'

Camber -1 deg 30' +/- 5'

Max camber diff left to right 10'

Caster 8 deg +/- 30'

Max caster diff left to right 40'

ARB 2nd from outer end (of 5)

Rear

Height 137mm +/- 2mm (from road to locating bore in rear axle side section (between toe and camber eccentrics))

Toe per wheel +13' +/- 2'

Max toe diff left to right 4'

Camber -1 deg 30' +/- 5'

Max camber diff left to right 10'

ARB middle of 3.

HTH.

Lucky

Edited by LuckyP on Thursday 27th December 00:08

[curley]

Cheers