Alarm/ immobiliser flashing lights
Discussion
I was wondering if the flashing alarm lights on my cerbera are trying to tell me something!
The rear screen one flashes approx once a second
The immobiliser red one is about once every 2 seconds
And the green door lock led flashes very rapidly
Is this right and what's the best way to test the alarm as I don't know if it works
The rear screen one flashes approx once a second
The immobiliser red one is about once every 2 seconds
And the green door lock led flashes very rapidly
Is this right and what's the best way to test the alarm as I don't know if it works
kevin63 said:
Also, sit in the car, arm the alarm, wait 30 seconds and then wave your arms around like a demented TVR owener and the alarm should go off if the interior sensors are working.
Just like when the immobiliser decides to work when it's turned off and you end up waving your arms about like a TVR owner?Vee8ight said:
kevin63 said:
Also, sit in the car, arm the alarm, wait 30 seconds and then wave your arms around like a demented TVR owener and the alarm should go off if the interior sensors are working.
Just like when the immobiliser decides to work when it's turned off and you end up waving your arms about like a TVR owner?
PuffsBack said:
Close the boot until the light goes out but don't latch it . Arm the alarm and wait 30 secs. Open boot and the alarm should go off.
Right, I tried this and the alarm doesn't go off, all that happens is the red light in the back window flashes and a relay clicks in time with it.Also is the indicators meant to flash when you lock/ unlock the car?
I know the immobiliser works fine.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff