Mr floppy

[jojackson4]

Started the jobs
Job 1 sort the mirrors
It looks like no mater how much silicon and swigey jollop the last man tried it will not fix the problem of 2 bolts missing (I think ) the collapsable mount is ok and is tight on the car .
It's where the mirror attaches to the pivot / how?
Has any one got a photo from inside the mirror of the mounting point as it is not shown in the bible
Thanks in advance
Jacko

[V8 GRF]

I imagine the part referred to as the 'toadstool' is broken. Pig of a job to refix but the part you (probably) need is HERE

[jojackson4]

No the toad is ok
Its where the toad fastens to the pivot and the pivot to the mirror(finding the grub screw on the toad is proving to be a pain in the knock-hole)

[Tinker15]

There is quite a bit of information on this thread http://tinyurl.com/ah7h5zp as I had the same problem. In the end I had it done professionally as it looked a pig of a job.

[ybt1982]

Tinker15 said:

There is quite a bit of information on this thread http://tinyurl.com/ah7h5zp as I had the same problem. In the end I had it done professionally as it looked a pig of a job.

If it is this problem then I'm with Tinker, get a pro to do it. I got Colin at TVRSS to have a look. Didn't rape the wallet that bad as he had a few spare mirrors lying around and managed to salvage the parts to fix mine

[jojackson4]

Mav1 is the man
Thanks gents its a lot easier when you know what it is meant to look like

[jojackson4]

Job1done stood proud on there own