Tell me about this pocket watch
Discussion
Evening everyone,
I was recently given the following pocket watch:




I've never heard of the make Waltham - is it good? How old is the watch and what is it worth? What is it likely to be made of? It isnt shiny or heavy enough to be gold, I would guess brass but it seems to have a very pink coppery hue to it almost like rose gold.
The main question at the minute is how o i get it open to look for a serial number? I have worked out that the knob on the top, when depressed and twisted, winds up the mechanism, but I cannot work out how to release the back - pushing and pulling gently up and down on the hoop appears to do nothing, and it doesnt want to swivel either. I'm stumped, and I dont want to force anything lest I break it.
Before some smartarse suggests it, I have been googling but I havent found much detailed information and have so far been unable to determine so much as a model name for the watch.
Any pocket watch experts out there?
I was recently given the following pocket watch:




I've never heard of the make Waltham - is it good? How old is the watch and what is it worth? What is it likely to be made of? It isnt shiny or heavy enough to be gold, I would guess brass but it seems to have a very pink coppery hue to it almost like rose gold.
The main question at the minute is how o i get it open to look for a serial number? I have worked out that the knob on the top, when depressed and twisted, winds up the mechanism, but I cannot work out how to release the back - pushing and pulling gently up and down on the hoop appears to do nothing, and it doesnt want to swivel either. I'm stumped, and I dont want to force anything lest I break it.
Before some smartarse suggests it, I have been googling but I havent found much detailed information and have so far been unable to determine so much as a model name for the watch.
Any pocket watch experts out there?
I've no idea about the watch, but it'd be great to wear on a decent chain, preferably with a waistcoat and suit. I'm thinking something slightly left field, like a Victorian style jacket. It'd be really nice at formal occasions to take that out to tell the time, rather than the ubiquitous wrist watch. You could top the look off with a silver topped cane, cravat and spats.
You could try talking to an auctioneer. Both Bonhams and Christies regularly hold watch sales and would have people capable of providing an estimated value for that watch. Alternatively I found this site which has a few for sale. Perhaps email them with some pictures?
http://www.ashton-blakey-antiques.com/vintage-pock...
http://www.ashton-blakey-antiques.com/vintage-pock...
I'm torn. On the one hand, I feel it would be wrong to do anything other than ridicule you. On the other hand, this is the watch forum and we're all nice here (apart from towards those who post up about wanting to buy fakes)... and that's a really nice pocket watch.


As for opening it, you see those tabs? One allows the glass to hinge forward, the other allows the back to hinge backwards.
Dibble said:
I've no idea about the watch, but it'd be great to wear on a decent chain, preferably with a waistcoat and suit. I'm thinking something slightly left field, like a Victorian style jacket. It'd be really nice at formal occasions to take that out to tell the time, rather than the ubiquitous wrist watch. You could top the look off with a silver topped cane, cravat and spats.


As for opening it, you see those tabs? One allows the glass to hinge forward, the other allows the back to hinge backwards.
Edited by Hoofy on Thursday 3rd January 11:22
http://en.wikipedia.org/wiki/Waltham_Watch_Company
It's possible you have a special and valuable watch - without opening it nobody can tell. The likelihood though is it's a boggo Waltham and worth not much apart from sentimental value. Waltham made 40 million of them: they're not that rare
It's possible you have a special and valuable watch - without opening it nobody can tell. The likelihood though is it's a boggo Waltham and worth not much apart from sentimental value. Waltham made 40 million of them: they're not that rare
To open the front, insert a nail in the gap at 1 to 2 o'clock. To open the back, the gap is at 10 to 11 o'clock. It might be a bit stiff.
Post a picture of the mechanism and we'll be able to tell you more. If it's gold there will be hallmarks inside the back case. But it's not unusual to see a base metal watch like yours.
http://en.wikipedia.org/wiki/Waltham_Watch_Company
Post a picture of the mechanism and we'll be able to tell you more. If it's gold there will be hallmarks inside the back case. But it's not unusual to see a base metal watch like yours.
http://en.wikipedia.org/wiki/Waltham_Watch_Company
Thanks everyone, the wikipedia page made interesting reading. I tried opening the back up but it was too stiff for my puny well-bitten fingernails so I will get one of the parents to try it later.
One other question - how does one set the time? I presume it is done somehow with the same knob used to wind the watch but I cant figure it out!
One other question - how does one set the time? I presume it is done somehow with the same knob used to wind the watch but I cant figure it out!
It looks like a crown set watch. Pull the crown away fronm the 12, it wil click and you'll be able to set the hands.
The alternative would be a pin set watch. Push a pin in and turn the crown to set. The pin will usually be on the side, but can be hidden behind the outer rear case, so I suggest you don't try yanking on the crown until you've opened the back and checked. If you pull the croun out on a pin set watch, you could damage the watch.
If it really is stiff, gently use a letter opener to open the back. A letter opener has rounded edges so it won't scratch as badly as a screwdriver.
HTH
The alternative would be a pin set watch. Push a pin in and turn the crown to set. The pin will usually be on the side, but can be hidden behind the outer rear case, so I suggest you don't try yanking on the crown until you've opened the back and checked. If you pull the croun out on a pin set watch, you could damage the watch.
If it really is stiff, gently use a letter opener to open the back. A letter opener has rounded edges so it won't scratch as badly as a screwdriver.
HTH
Thanks for the advice!
With the help of Dad this evening I used a kitchen knife blade (even a letter opener was too thick!) to finally gain access to the back of the watch. The case has 2 backs for some reason - an outer shell with a short number stamped in it, and then an even harder to open inner shell which revealed the following:


As for setting the watch - it turned out to be one of the crown set types after a gentle tug and twirl on the top knob.
Dad reckons that on half a dozen turns of the knob it will keep time for 8 days. I was sceptical, but he warned that over-winding the watch would badly damage the spring. "How do I know when its wound enough?" I asked, to which I was told "when you can feel the right amount of tension in the spring". That's useful
With the help of Dad this evening I used a kitchen knife blade (even a letter opener was too thick!) to finally gain access to the back of the watch. The case has 2 backs for some reason - an outer shell with a short number stamped in it, and then an even harder to open inner shell which revealed the following:


As for setting the watch - it turned out to be one of the crown set types after a gentle tug and twirl on the top knob.
Dad reckons that on half a dozen turns of the knob it will keep time for 8 days. I was sceptical, but he warned that over-winding the watch would badly damage the spring. "How do I know when its wound enough?" I asked, to which I was told "when you can feel the right amount of tension in the spring". That's useful

Edited by mat777 on Thursday 3rd January 20:08
Mat, I know I've taken the piss, but I honestly do like it. I think it's a nice, unfussy looking thing. And if you've inherited, it'll no doubt hold sentimental value. Seriously, thanks for taking the time to post up the internals/photos. Fortunately other posters were more helpful than me.
Just goes to show, we have to see the movement!!
That is not a cheap watch. Gold plated rather than solid, so the scrap value is negligable.
However, your movement has several things that make it stand out. Firstly it's a 17 jewel. Jewels refer to tiny rubies that are used as low friction bearings. Bottom end watches have seven, a high end watch could have dozens. Your obviously sits between the two.
Your movement has been adjusted. This means that the watchmaker timed the watch in a number of positions.
Most mechanical watches are only calibrated with the face up. Turn them upside down and they may run faster or slower. Your has been calibrated in three different positions, making it far more accurate than most.
Next if you look at the adjuster above the balance wheel (fast moving bit) it has a swan neck adjuster. Normally watches just have a lever here that you move back and forth. Yours is adjusted with a tiny screw, allowing for much finer adjustments. It's a sign of higher quality on older watches.
Finally there is good detail machined on the movement, and the movement is nice and clean.
The long number starting 244 is it's serial number.
I wouldn't like to hazard a guess at the value. It will depend very much on the condition of the case. Can you see any brassing? (Brass base metal showing through the gold at wear points). This will reduce value. But on the plus side, you have a good clean, clear unfussy face, which will make the watch more desiarable.
Personal engravings will lower the value.
I think you're easily into a couple of hundred for this one, but I'm not a pocket watch expert. Get it valued for insurance purposes, I could be a long way off. You will need an expert, not a local jeweller.
Really nice, thanks for sharing.
That is not a cheap watch. Gold plated rather than solid, so the scrap value is negligable.
However, your movement has several things that make it stand out. Firstly it's a 17 jewel. Jewels refer to tiny rubies that are used as low friction bearings. Bottom end watches have seven, a high end watch could have dozens. Your obviously sits between the two.
Your movement has been adjusted. This means that the watchmaker timed the watch in a number of positions.
Most mechanical watches are only calibrated with the face up. Turn them upside down and they may run faster or slower. Your has been calibrated in three different positions, making it far more accurate than most.
Next if you look at the adjuster above the balance wheel (fast moving bit) it has a swan neck adjuster. Normally watches just have a lever here that you move back and forth. Yours is adjusted with a tiny screw, allowing for much finer adjustments. It's a sign of higher quality on older watches.
Finally there is good detail machined on the movement, and the movement is nice and clean.
The long number starting 244 is it's serial number.
I wouldn't like to hazard a guess at the value. It will depend very much on the condition of the case. Can you see any brassing? (Brass base metal showing through the gold at wear points). This will reduce value. But on the plus side, you have a good clean, clear unfussy face, which will make the watch more desiarable.
Personal engravings will lower the value.
I think you're easily into a couple of hundred for this one, but I'm not a pocket watch expert. Get it valued for insurance purposes, I could be a long way off. You will need an expert, not a local jeweller.
Really nice, thanks for sharing.
Edited by mikeveal on Thursday 3rd January 21:48
mikeveal, that was a most fascinating read 
I am not looking to sell it, the value was merely to help me decide when to use it. As such, considering what you have written about the quality, and bearing in mind the age and replaceability of the watch in its current fairly good condition (the glass has a few marks, and there is just some very slight brassing on the back of the case, but overall it is wearing its 90-odd years very well), I think i will keep it safely at home for best occasions - and even get a real gold chain for it if it will only be worn at very respectable, dressy functions.
For uni formal occasions where I would be wearing my 3-piece suit, I think I will buy a cheaper, lower quality watch and a plated chain that I can wear with less trepidation of loss/damage or mugging. I've got my eye on a 1960s Smith wind-up open-face thats currently on ebay for a fiver

I am not looking to sell it, the value was merely to help me decide when to use it. As such, considering what you have written about the quality, and bearing in mind the age and replaceability of the watch in its current fairly good condition (the glass has a few marks, and there is just some very slight brassing on the back of the case, but overall it is wearing its 90-odd years very well), I think i will keep it safely at home for best occasions - and even get a real gold chain for it if it will only be worn at very respectable, dressy functions.
For uni formal occasions where I would be wearing my 3-piece suit, I think I will buy a cheaper, lower quality watch and a plated chain that I can wear with less trepidation of loss/damage or mugging. I've got my eye on a 1960s Smith wind-up open-face thats currently on ebay for a fiver
Edited by mat777 on Thursday 3rd January 22:44
Unfortunately the majority of Waltham pocket watches don't seem to be too valuable. I received one as a gift from my grandfather when I was born. Having looked around and done research I'd be surprised if it was even worth £100 (mine has a similar movement to yours) but obviously given the sentimental value, I'll never sell it.
What's most striking is the age of the watch - at least 100 years old, and after a service with my trusted watchmaker I think it keeps better time than my Omega Speedmaster.. even he remarked at how accurate it was
What's most striking is the age of the watch - at least 100 years old, and after a service with my trusted watchmaker I think it keeps better time than my Omega Speedmaster.. even he remarked at how accurate it was

Hoofy said:
You'll get into a routine of doing it every day at a specific time. 
↲I wouldn't wind it every day until you've had it serviced. As the dry jewels will wear the pivots of your wheels. Once it's serviced you'll then be able to wind it until it stops. I guess, it's designed to be wound everyday, it will run for longer than a day, but keeps it's time best for one day.
Gassing Station | Watches | Top of Page | What's New | My Stuff


