Window Trim

[Alan Whitaker]

Hi All
Just been looking for the window channel for the doors, anybody know where to get it from. Is there a small black trim that fits the door top.

Alan

[v8s4me]

Here you go

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[Alan Whitaker]

Hi All.
Thanks, samples on the way,there must be a trim on the outside of the door and something where the door meets the body on the lock side as the door line is 1/4 lower than the body line, pictures if you have them



ALan

Edited by Alan Whitaker on Tuesday 8th January 18:09

[phillpot]

Alan Whitaker said:

there must be a trim on the outside of the door and something where the door meets the body on the lock side as the door line is 1/4 lower than the body line

Alan, is this where you mean?



There was a thread about these quite recently, think still available? david Geralds maybe.



A rubber seal runs from there to the front of the door and is "tucked" under the quarter light frame. I used IRS 1656 EPJ from here.
It will need some careful cutting at the front end. Been a thread very recently about sticking this on with some clever super sticky gluey sealant stuff the op found lying around at his work

[Alan Whitaker]

Thanks Mike, just what I need, with these two things thats the doors done.

Alan