how do I capture flowing water?
how do I capture flowing water?
Author
Discussion

plumAJP

Original Poster:

1,149 posts

218 months

Monday 14th January 2013
quotequote all
Im a bit of a DSLR noob so bare with.

I have a nikon D40 using standard lense 18-55.

I was walking the dog down the beach and decided to try and capture the white water flowing around some rocks but to have the wish wash effect.

It was quite a bright day so I used the darkest filter I had ND8, camera in manual mode, smallest appeture and a lengthyish shutter speed.

The photos were coming out very orangey/bleached over exposed and I could hardly see any detail. I messed with appeture and shutter speed but just could not get the right combo, removed the filter and tried and the pics were over exposed, I varied the shutter speed but then the image would look ok but the water did not have the effect I wanted.

How can I get the image I want chaps?

Thanks in advance

stuttgartmetal

8,152 posts

245 months

Monday 14th January 2013
quotequote all
Bucket.

Piersman2

6,676 posts

228 months

Monday 14th January 2013
quotequote all
Sponge.

plumAJP

Original Poster:

1,149 posts

218 months

Monday 14th January 2013
quotequote all
just knew it was going to happen LMAO

markmullen

15,877 posts

263 months

Monday 14th January 2013
quotequote all
Depending on the brightness of the scene an ND8 won't be sufficient to stop the shot being overexposed.

For really silky water in bright light you'll want a 10 stop ND, eg Lee Big Stopper, Hitech ProStop or B&W screw in.


plumAJP

Original Poster:

1,149 posts

218 months

Monday 14th January 2013
quotequote all
ok cool.

what stength are the welding mask glasses? as i have a spare one somewhere.

is that where i mgoing wrong then? just the filter?

I do need a small apperture and a relatively long shuter speed?

paul911

2,771 posts

262 months

Monday 14th January 2013
quotequote all
markmullen said:
Depending on the brightness of the scene an ND8 won't be sufficient to stop the shot being overexposed.

For really silky water in bright light you'll want a 10 stop ND, eg Lee Big Stopper, Hitech ProStop or B&W screw in.
^ This or wait till it gets darker...

markmullen

15,877 posts

263 months

Monday 14th January 2013
quotequote all
plumAJP said:
ok cool.

what stength are the welding mask glasses? as i have a spare one somewhere.

is that where i mgoing wrong then? just the filter?

I do need a small apperture and a relatively long shuter speed?
Have a look at this, it might help http://www.markmullenphotography.co.uk/blog/2012/8...

plumAJP

Original Poster:

1,149 posts

218 months

Monday 21st January 2013
quotequote all
thanks chaps. really helpfull.


I am using a tripod, havent had a good go at water yet. waiting for snow to melt