Suspension WIKI

[v8s4me]

Now the coutry is blanketed in snow and there's nothing better to do, how about updating the suspension WIKI with your set up?

If you need help, and it very tedious, just PM me because I've got nothing better to do at the moment either.

nag, nag, nag mag, nag

[GadgeS3C]

Your persistence is impressive - if I knew what my set-up was I'd update the wiki!

[RayTVR]

Ok - I give in

I'll brave the freezing garage and measure the ride heights and update

[tozerman]

OK I give in, have added my input

Cheers.....Tony..

[v8s4me]

Well done, and thank you. Missing info can easily be added later.

[glenrobbo]

Sorry Joe,
All I know is Austin had all four corners fitted with uprated Koni's eons ago, no idea what the spring rates were, & I can't be bothered lying out in the snow measuing ride hights at the moment.
New dampers, springs & bushes are some way down my "to do" list, but when it happens I'll let you know.
Keep up the good work, & don't let your p15 fame go to your head.

[RayTVR]

Here goes

Gaz Golds all round with 375/300 springs

Right height (measured to outriggers). 175 mm front 185mm back

Front 14 clicks rear 18 clicks

Happy with setup but haven't tried any other options or been to track

As these were fitted 2006 I would be interested to know if they are due for change -they are quite corroded and have to come off anyway as the bump stop on the rear is split

Hope this helps - anything else?

[Alan Whitaker]

Hi All
Penske 7300 all round, 600lbs 8" Eibach Race Springs on the back & 500lbs 7" Eibache Race Springs on the front, clearance 180mm on the back and 175mm on the front, all set at middle on clicks.


Alan

[GreenV8S]

Alan Whitaker said:

Hi All
600lbs 8" Eibach Race Springs on the back & 500lbs 7" Eibache Race Springs on the front

Softer on the front, really?

[v8s4me]

Thanks chaps. Please have a look at the WIKI and let me know if your information looks OK in the table format.
Thanks
Joe

[Alan Whitaker]

Hi All,
Lighter engine, all ally.

Alan