Little bit of a clearout...

[Bassfiend]

OK - just been out to the garage to dig out my 2nd set of Magnecors for someone on here who said they wanted them, anyway, also in the "bits box" are...

2 x sets of Bosch metal bodied fuel pump and ECU relays. One set replaced by me to try to identify my electrical issue and the other set came along with the car when I got her. (I assume the previous owner substituted the others in the same way that I did and realised that the issue wasn't the relays so left them in the glove box as "spares".)

1 x "Nearly New" Bosch Coil ... had about six months use, replaced to try to identify electrical issue as above.

1 x "Nearly New" Ignition amplifier module ... as above.

1 x AFM for use with 14CUX - was working fine when removed to fit the CANEMS.

1 x stepper motor for use with 14CUX - was working fine when removed to fit the CANEMS.

1 x Distributor - as above, dizzy itself believed to be fine however needs vacuum advance sorting as that isn't working.

1 x Non-Lucas dizzy cap and rotor arm - was working fine when removed to fit the CANEMS.

1 x Set of 8 brand new spark plugs - B7ECS.

1 x 14CUX 4.0HC ECU.

1 x 14CUX ECU wiring loom plug.

Any interest - yadda yadda yadda - message me.

Phil

[Excitedoldgeezer]

have sent a message for a few bits ;-)

[Flyin Banana]

Boing !!!

if the coil is still available my mrs could do with a replacement so ment to say car could have a nice new one rather than the rusty thing

cheers Rob

[ChimpofDarkness]

Flyin Banana said:

Boing !!!

if the coil is still available my mrs could do with a replacement so ment to say car could have a nice new one rather than the rusty thing

cheers Rob

"my mrs could do with a replacement coil"



"she can have a nice new one rather than the rusty thing"



Ever thought about condoms Flyin Banana?

A lot kinder on the wife mate

[Jonny cobra]

Hi Have the plugs gone ?? If not can i have them ??

JC..

[Sardonicus]

Phil YHM

[italian job]

Have sent a message re ignition amp module

[rigga]

Message sent regarding afm

[TJC46]

would be interested in the stepper motor Phil if it hasnt gone yet. Email me thru P/Heads, thanks Tom.

[Sardonicus]

Made contact thanks Phil

Edited by Sardonicus on Wednesday 23 January 11:22