V8 flywheel?

[SporttiJanne]

Hi all!

I wonder if all V8 flywheels are the same in TVR 350i and for instance in Discoveries? Or what models has this flywheel with 240mm clutch?
I am trying to locate one, while I am in England from the mid of this week to the mid of next week.

Thanks for advise in advance,
Jean

[Danny Hoffman]

Hi,

Are you after a clutch or a flywheel?

Cheers

Danny

[SporttiJanne]

Flywheel.

[Danny Hoffman]

Hi,

I have a spare which needs a new ring gear fitted. I also have the new ring gear.

PM me if this would be of interest.

Cheers

Danny

[SporttiJanne]

Danny, You have a mail.

[adam quantrill]

If you have a bigger clutch it might not (or might, depending on the type) fit under the bellhousing.

[Graham]

range rover flywheel is about 10mm thicker and a fair bit heavier, also runs a bigger clutch

[SporttiJanne]

Am I correct assuming that a flywheel which will take 240mm clutch should be correct for a standard V8 Wedge. And that the Landrover clutch is larger at appr. 292mm?

[SporttiJanne]

This is sorted now.
Thanks Danny!

[Danny Hoffman]

Hi,

Did you get the car back ok?

There is a note re starter motors in http://www.theseacpages.co.uk/media/wedge_epistles...

Cheers

Danny

[SporttiJanne]

Car (390SE) was shipped to Finland this morning.
I am still looking for a 400SE or 450SE project to make my collection complete
So, if anyone knows about a project car, please send me a PM.
Possibly a Chimaera has to do, as they were made a lot more.

Thanks for the link!