Track day sump for sale?

[Countrybumpkin]

Has anybody got a TDS for sale or know where I can get one to buy or made? My car is having some work done a Jetstream to get it track ready but we can't get our hands on a TDS Really appreciate any help?

Al

[key750]

try to call tuxman

[2.5bluenob]

key750 said:

try to call tuxman

+ 1, i got one from tux

[supaniga]

If someone has got some good pictures and measurements I would hope I can convert peoples original sumps . Help please people !!!!! . Unless the original alloy is really horrible

[2.5bluenob]

supaniga said:

If someone has got some good pictures and measurements I would hope I can convert peoples original sumps . Help please people !!!!! . Unless the original alloy is really horrible

That's what tux was offering. I think it's the best way to do it

[JBliss]

The original alloy is horrible.. Hard to weld as its contaminated metal..

I bought mine from Noble direct, but then had to get fittings.

Noble Motorsport sell them currently.

[TuxMan]

Sorry guys I'm no longer in the position to supply Track day sumps .
Noble only I'm afraid .

Tux

[Countrybumpkin]

Thanks all for your help. I'll give Noble Motorsport a ring on Monday.

Al

[supaniga]

Please,please,please ,I know this is an old thread but has anyone got some good pictures and measurements of a track day sump . I have bought a spare normal sump and want to convert it any help would be much appreciated ,dean .

[JayHeal]

Hope this helps.

[JayHeal]

[AMG Merc]

JayHeal said:

Handsome looking puppy isn't she?! Welding by Stevie Wonder on Iron Bru!

[JayHeal]

supaniga said:

Please,please,please ,I know this is an old thread but has anyone got some good pictures and measurements of a track day sump . I have bought a spare normal sump and want to convert it any help would be much appreciated ,dean .

Do you have some one that can weld up a new sump?

[supaniga]

Thankyou very much for the pics ,I will have a go at doing it myself as I have an ac tig . On a pic I saw sometime ago I am sure there was a triangle section that dropped down to the same level as the chassis rail that goes across under the sump ?.any more pics are always helpfull many thanks dean

[supaniga]

Thankyou very much for the pics ,I will have a go at doing it myself as I have an ac tig . On a pic I saw sometime ago I am sure there was a triangle section that dropped down to the same level as the chassis rail that goes across under the sump ?.any more pics are always helpfull many thanks dean

[JBliss]

Good luck. I tried welding one and it was not fun.

In the end I just paid the money and got one from Noble

[StreetDragster]

When i was ringing round about them to enquire about retrofits, i was told the difficulty was successfully welding cast alloy to plate alloy. Never done it myself so i don't know how difficult that is.

Thanks

Matt

[Metalman]

It's possible to do, as I made the sump on the left of the photo. It took ages and was really difficult, getting the weld to hold hot oil was the hardest part as the sump is made from crappy metal. Dont forget to extend the oil pickup by (I think) 30mm. Then you have the enjoyable job of swapping your sumps over

[JayHeal]

[JayHeal]

Hope this helps.
Jay