Mechanical question
Mechanical question
Author
Discussion

nickcowen

Original Poster:

625 posts

194 months

Saturday 26th January 2013
quotequote all
How many turns on average would you say it takes till fully wound on a mechanical non self winding watch? just curious

watch in question


SP147GTA

139 posts

171 months

Saturday 26th January 2013
quotequote all
Depends on the size of the mainspring really (the power source), just wind until the crown gently pushes back on you.
Cool watch box

yeti

10,704 posts

306 months

Saturday 26th January 2013
quotequote all
With a single barrel movement, it seems to be around one turn for 2hrs of power, ballpark.

If I wind, say, my Speedy every day, it takes 12 winds to become fully wound again.

HereBeMonsters

14,180 posts

213 months

Saturday 26th January 2013
quotequote all
Weirdly, I have almost every watch pictured in that box.

GC8

19,910 posts

221 months

Sunday 27th January 2013
quotequote all
NeMiSiS said:
25.
My handwound Rolex is only taking twelve now - what does that suggest to you?

FreeLitres

6,128 posts

208 months

Sunday 27th January 2013
quotequote all
Is that a Getat?

I like that colour combo.

nickcowen

Original Poster:

625 posts

194 months

Sunday 27th January 2013
quotequote all
FreeLitres said:
Is that a Getat?

I like that colour combo.
It was sold as marina military on eBay

SP147GTA

139 posts

171 months

Sunday 27th January 2013
quotequote all
GC8 said:
My handwound Rolex is only taking twelve now - what does that suggest to you?
That 25 winds is incorrect. It isn't a set number for every movement, each mainspring is of a different length and tension and different kinds of movements require varied amounts of energy.

You said only takes 12 winds NOW, did it used to be more and is now different?

GC8

19,910 posts

221 months

Sunday 27th January 2013
quotequote all
Not the clearest of posts... Yes Id expect it to have taken 25 when new, but its now taking only half that and the reserve is closer to 30hrs.

Accuracy is still good.

SP147GTA

139 posts

171 months

Sunday 27th January 2013
quotequote all
GC8 said:
Not the clearest of posts... Yes Id expect it to have taken 25 when new, but its now taking only half that and the reserve is closer to 30hrs.

Accuracy is still good.
Interesting, I don't know much about older Rolex movements I guess it is nothing too much to worry about if the accuracy is still there. If it is over 5 years since it was serviced I would recommend getting that done. The mainspring is always replaced as a consumable part, providing you take it to a decent watch maker, ideally Rolex but I bet that would be pricey!

Got a picture?

andy tims

5,606 posts

277 months

Sunday 27th January 2013
quotequote all
Just wind until you feel resistance. Between 10 & 25 would be normal.

GC8

19,910 posts

221 months

Sunday 27th January 2013
quotequote all
A generic picture. Its a 6694 with a 1225 movement:




You think that it may be well within service tolerance then Andy?

Tanguero

4,535 posts

232 months

Monday 28th January 2013
quotequote all
GC8 said:
Not the clearest of posts... Yes Id expect it to have taken 25 when new, but its now taking only half that and the reserve is closer to 30hrs.

Accuracy is still good.
The power reserve will naturally reduce over time as the spring looses resilience however the number of turns to fully wind the spring will not change.

The turns to wind is dependent on the physical dimensions of the mainspring, the barrel and the gearing of the winding train so unless there is a physical change in one of those it should always take the same number of turns of the crown to wind.

GC8

19,910 posts

221 months

Monday 28th January 2013
quotequote all
Thanks, I will attempt to establish how many winds a 1225 took when new.

Tanguero

4,535 posts

232 months

Monday 28th January 2013
quotequote all
GC8 said:
Thanks, I will attempt to establish how many winds a 1225 took when new.
It will take the same number of turns as it does now, unless the main spring has been replaced with onoe of different dimensions or something is broken.