£457 and 2 months wait for clutch parts!......
Discussion
Shopped around this morning for a new clutch for my Griff - couldn't believe dealers quote (and this is just for the parts, I'm fitting it).
Long live independent suppliers I say.....
Anyone bought a clutch for a 500 lately and care to offer any recommendations?
>>> Edited by neilmac on Wednesday 15th September 09:47
Long live independent suppliers I say.....
Anyone bought a clutch for a 500 lately and care to offer any recommendations?
>>> Edited by neilmac on Wednesday 15th September 09:47
This is the reply i got from AP Racing when I asked them the some question......
The Rover V8 powered TVR Griffith are normally equipped with a Ø9.5" clutch type.
AP Racing used to supply TVR with a medium torque clutch kit.
CP2345-8 pressure plate, clamp load 1900lb, retail £97.12 + vat
CP2346-4 driven plate, spring centre, organic facings, 1.0"x23T spline. retail £92.55 + vat
this combination will handle 270lbft.
The next option will accept 300lbft
CP2394-14 pressure plate, clamp load 2400lb, triple drive straps to add strength for reverse torque from down changes, SG iron pressure plate casting rated to 9,000RPM. retail £138.00 + vat. Release load will increase by approx10% over above kit.
Use with CP2346-4 driven plate.
You can order the above via our agent in the North, Questmead in Rochdale sales@questmead.co.uk
Peter Collen
Hope this helps.
The Rover V8 powered TVR Griffith are normally equipped with a Ø9.5" clutch type.
AP Racing used to supply TVR with a medium torque clutch kit.
CP2345-8 pressure plate, clamp load 1900lb, retail £97.12 + vat
CP2346-4 driven plate, spring centre, organic facings, 1.0"x23T spline. retail £92.55 + vat
this combination will handle 270lbft.
The next option will accept 300lbft
CP2394-14 pressure plate, clamp load 2400lb, triple drive straps to add strength for reverse torque from down changes, SG iron pressure plate casting rated to 9,000RPM. retail £138.00 + vat. Release load will increase by approx10% over above kit.
Use with CP2346-4 driven plate.
You can order the above via our agent in the North, Questmead in Rochdale sales@questmead.co.uk
Peter Collen
Hope this helps.
Gassing Station | Griffith | Top of Page | What's New | My Stuff



