on the scrounge...
Discussion
I'm after a short length (300mm) of slotted trunking like this only much smaller, say 25 x 25mm.
Only place I can find it so far is RS but minimum purchase is 4 metres

If you use it at work or whatever and have an "off-cut" I'd be very grateful
Last resort would be to "modify" some ordinary mini trunking, bit tedious and time consuming!
Only place I can find it so far is RS but minimum purchase is 4 metres

If you use it at work or whatever and have an "off-cut" I'd be very grateful

Last resort would be to "modify" some ordinary mini trunking, bit tedious and time consuming!
Actually a little job on the Taimar but I reckoned on a bigger readership on this forum so maybe more chance of success?
Inspired by this tidy job on an earlier TVR I'm planning on a bit of re-wiring....

Will be a bit different, with cables "popping" out of the trunking to the relevant fuse box's, relays etc.
(it's working well in my head, time will tell if it works in practice)
Inspired by this tidy job on an earlier TVR I'm planning on a bit of re-wiring....
Will be a bit different, with cables "popping" out of the trunking to the relevant fuse box's, relays etc.
(it's working well in my head, time will tell if it works in practice)
Bobhon said:
Are you going to use those or the new fangled Earth Trip type things?
Will be using very similar fuse box's but with "standard" blade fuses, same as the S cars have.Also got some relays with built in fuse for main power circuits.I bought a couple of OEM fuse box's full of fuses very cheap off Ebay, the majority of "after market" fuses available seem to be of dubious quality, blades are thinner so they don't clip in nice 'n tight (imho).
Gassing Station | S Series | Top of Page | What's New | My Stuff


