Magnetised Patek
Author
Discussion

detee

Original Poster:

669 posts

180 months

Tuesday 12th February 2013
quotequote all
I am not sure if anyone can help, but I have a question.

I bought a Patek 5711 last year brand new, this was a watch that I had always dreamt of. I did not wear it that much mainly weekends.Over Christmas I was wearing it daily, and it just stopped. Obviously I was gutted and sent it back. The dealer has told me it has magnetised, and to be honest I do not know what that means, or if that would stop it. I have owned numerous watches and this has never happened and they have all been automatic.

Does this sound plausible? Any advice gratefully received.

clockworks

7,818 posts

176 months

Tuesday 12th February 2013
quotequote all
Magnetised watches generally run fast, and may not run for the full 40 hours (or whatever the watch should do on a full wind). It's normally the balance spring that gets magnetised. The coils then stick together, making the balance swing at a faster rate. I suppose if it was bad enough, the watch would stop, but I've never seen or heard of it happening in normal use.
Modern quality watches are practically immune to magnetism unless you do something silly with them.

pikeyboy

2,349 posts

245 months

Tuesday 12th February 2013
quotequote all
Have you been any where near any large electrical motors etc.

Hoofy

80,188 posts

313 months

Tuesday 12th February 2013
quotequote all
Isn't a degausser relatively cheap, safe and easy to use? (Only posting this for reference in case you get quoted with added Patek Tax.)

clockworks

7,818 posts

176 months

Tuesday 12th February 2013
quotequote all
Degausser is very cheap on eBay, or from Cousins. Think I paid less than £20 for mine.

Sounds more like the shop is using it as an excuse to charge for the repair. I assume you get a decent warranty with a P-P?

detee

Original Poster:

669 posts

180 months

Tuesday 12th February 2013
quotequote all
They are not charging me anything, the watch is only 6 months old, it would be going back if they did!

I was just trying to find out if it was a plausible reason. Rather than me being fobbed off.

Thanks again.

anonymous-user

85 months

Tuesday 12th February 2013
quotequote all
Detee's recent whereabouts


raptor600

1,356 posts

177 months

Tuesday 12th February 2013
quotequote all
I wouldn't worry what went wrong -Patek will fix it so no matter what's happened you will get it back as new smile

Manks

28,176 posts

253 months

Tuesday 12th February 2013
quotequote all
detee said:
I am not sure if anyone can help, but I have a question.

I bought a Patek 5711 last year brand new, this was a watch that I had always dreamt of. I did not wear it that much mainly weekends.Over Christmas I was wearing it daily, and it just stopped. Obviously I was gutted and sent it back. The dealer has told me it has magnetised, and to be honest I do not know what that means, or if that would stop it. I have owned numerous watches and this has never happened and they have all been automatic.

Does this sound plausible? Any advice gratefully received.
Detee thought his Acme Mega Magnet was an ace Christmas present:


Adrian W

15,623 posts

259 months

Tuesday 12th February 2013
quotequote all
Send it back, I wouldn't want to buy a Nautilus and have doubts, I'm sure they will check it out

clockworks

7,818 posts

176 months

Wednesday 13th February 2013
quotequote all
detee said:
They are not charging me anything, the watch is only 6 months old, it would be going back if they did!

I was just trying to find out if it was a plausible reason. Rather than me being fobbed off.

Thanks again.
It wasn't clear from your original post - thanks for clarifying. Good to know that the shop is getting it sorted under warranty.

As it happens, I have a watch in for "repair" just now. I don't really do watches for paying customers, but I've fixed a couple of clocks for this chap, and he asked me to look at his wife's Omega dress watch.
It's gaining over an hour every day. I popped the back off yesterday afternoon, and sure enough, the outer coils of the balance spring are sticking together.
A quick pass over the degausser, and it's now gaining just 10 minutes a day, so I'm on the right track.

I'll run it for a couple of days, then I'll degauss it again, before putting it on the timing machine - the regulator is quite a way off the mid-point.
Hopefully this will restore it to good working order. The movement is little too small for me to be taking it apart!

detee

Original Poster:

669 posts

180 months

Wednesday 13th February 2013
quotequote all
Thanks for all of your advice, it has put my mind at rest a little, and the humour took a little tension away. I think when you have wanted something for so long you want it to be perfect. I cannot wait to get it back.

I appreciate everyones help.