15INS OZ WHEELS, HOW RARE NOW,

[superwedge]

are these wheels getting hard to get now,what do think ????? and price too,

[Number 7]

Not as rare as 16 x 9 rims! I sold a couple of sets last year, a mixture of 8 x 15 and 8.5 x 15. A lot obviously depends on condition, but I would say in the range of £75 - £100 each. More for the centre caps (I'd acquired a spare set as well) and more still if the wheel has been split and properly refurbished.

[Jack Valiant]

Well if anyone has a pair of OZ (400SE style) 16 x 9 rims for the back of mine I am in the market for the right money especially after my current upgrade!!!

Chris

[5.0ltr]

http://www.ebay.co.uk/itm/OZ-racing-wheels-/290861...

[Danny Hoffman]

4 stud wheels ;-(

[Number 7]

Jack Valiant said:

Well if anyone has a pair of OZ (400SE style) 16 x 9 rims for the back of mine I am in the market for the right money especially after my current upgrade!!!

Chris

Chris,

If this is for your 350, do you know if the arches will accomodate 9 x 16 wheels without mods? I used to run 8.5 x 16 OZ splits on the rear of my 400, and they were just about ok in terms of sitting within the arches - one outer edge of the tyre used to rub slightly on the arch when heavily loaded (luggage). With the 9 x 16 s now no such problems, although the offset is different, so the wheels sit inboard a bit more.
You're welcome to try mine on for size if you like - my car's going nowhere at present, as the ECU is taking a holiday in Australia, although hopefully back soon!

Edited by Number 7 on Sunday 17th February 18:31

[Number 7]

Jack Valiant said:

Well if anyone has a pair of OZ (400SE style) 16 x 9 rims for the back of mine I am in the market for the right money especially after my current upgrade!!!

Chris

Chris,

If this is for your 350, do you know if the arches will accomodate 9 x 16 wheels without mods? I used to run 8.5 x 16 OZ splits on the rear of my 400, and they were just about ok in terms of sitting within the arches - one outer edge of the tyre used to rub slightly on the arch when heavily loaded (luggage). With the 9 x 16 s now no such problems, although the offset is different, so the wheels sit inboard a bit more.
You're welcome to try mine on for size if you like - my car's going nowhere at present, as the ECU is taking a holiday in Australia, although hopefully back soon!

Edited by Number 7 on Sunday 17th February 18:32

[Jack Valiant]

Would appreciate a try out, I have the 15" 400 SE style OZ's on the car (89 S2 350i) and seem to have loads of room in the rear arches bu I am doing a serious engine upgrade and want to have as much rubber on the rears!

Where about's are you as I am in N. Kent?

Chris

[hansdaal]

Hallo,

Still have a set of 16 inch OZ 400 se style wheels in 7 x 16. I also have a full set of NEW 2,5 inch outer rims. With these the wheels comes up at 8 x 16 ET 20. Could send some pics.

greetz Hans