Exhaust dimensions please

[db418BHP]

What are the standard diameters?

Tailpipes, in and out of the box and the single pipe also please.

[Exige S]

I know the griff exhaust is slightly different, but assuming you mean the system backwards from the y-piece, I had one delivered not too long ago and it measured 2.9mx0.8m at it's widest point, height is approx 0.2m, weight is around 25kg.

HTH.

[db418BHP]

Exige S said:

HTH.

Thanks but not really

I want the diameters. Looking to order a few lengths and bends.

[QBee]

db418BHP said:

Thanks but not really

I want the diameters. Looking to order a few lengths and bends.

I have a complete spare chimaera exhaust system off a standard 99 car (bought off Chimpjunkie, whatever car he had). I will pop out and measure anything you like if you can make a list
I will start with the three things you have listed. I only have a tape measure......

[QBee]

Junction with Y piece, measured across the end 72mm. Not sure of the gauge of the pipe, looked to be under 1mm
After split, pipes going into silencer box outside circumference 160mm, divide by pi, diameter is 51mm, but that is by wrapping a cloth tape measure around the pipe, so poss 1mm less internal diameter?
Immediately after box same as before box, give or take 1mm circumference (one was 161, one 159)
Tail pipe is wider, 62mm diameter

Do you want photos so you can see layout? Whole thing in my shed......