Plenum and rocker cover , powder coating... what colour

[Robert Lees]

Spent all afternoon wrestling the plenum and rocker covers off to get them powder coated.
trying to decide on the colour.

My car is starmist blue, the paint place said couldn't do that blue but could do one very similar to the hoses and magnacore leads etc. I quite like the idea.

or rockers blue and plenum silver, or everything black.

appreciate opinions.

getting the drivers side rocker off was a right pig!, couldn't get it past the fuel pipes even after disconnecting the rubber pipes. Also may need some new plenum bolts as I may have been a bit vigorous with the HEX spanner.

will post pics when all back together

[MADMAX2]

i coated my rocker cover same colour as car i left the plenum just cleaned it up as painting the plenum decreases heat loss..

the plenum bolts you can get on flea bay .. i may have my old set in the garage

[jojackson4]

Mines a 500 so it had to be a purple
5 different coaters no lilac so blinged it up a bit

[Robert Lees]

MADMAX2 said:

i coated my rocker cover same colour as car i left the plenum just cleaned it up as painting the plenum decreases heat loss..

the plenum bolts you can get on flea bay .. i may have my old set in the garage

just ordered some off Ebay thanks!.

Had thought of leaving the plenum as is , possibly use a dremel to shine it up. I think having it Sparco blue may be a bit much! and the bass will still be metal.