Drain Plug On S2 Gearbox?
Drain Plug On S2 Gearbox?
Author
Discussion

ElvisWedgely

Original Poster:

2,715 posts

194 months

Thursday 14th March 2013
quotequote all
I took my S2 for some chassis waxoil at a local garage and told him to change the gearbox oil while it was up on the ramps. He did the chassis waxoil but says there is no drain plug for the gearbox. Is this possible? I always thought all gearboxes have a drain plug. Otherwise how do you get the oil out?
Turn the car on its side and shake it maybe? Anyway, he says he checked the oil level and its all fine. I've never come across such a thing. Advice please....

Tony. TCB.

GadgeS3C

4,727 posts

193 months

Thursday 14th March 2013
quotequote all
Standard on that model Sir!

The Type 9 doesn't have a drain plug, Ford dealers used to have the YTS lad suck the old oil out with a straw. wink

More high tech approaches are now available.

S2Mike

3,065 posts

179 months

Thursday 14th March 2013
quotequote all

.
Ah, beaten to the punch line but heres a photo. Square drive plug, to remove.

Maffe

479 posts

288 months

Thursday 14th March 2013
quotequote all
You need a suction pump to get the old oil out smile

Maffe

479 posts

288 months

Thursday 14th March 2013
quotequote all

Or with the geabox in place

S2Mike

3,065 posts

179 months

Thursday 14th March 2013
quotequote all
Easier to get at the plug with gearbox out though!! smile

Maffe

479 posts

288 months

Thursday 14th March 2013
quotequote all
S2Mike said:
Easier to get at the plug with gearbox out though!! smile
And no need for a suction pump beer

S2Mike

3,065 posts

179 months

Thursday 14th March 2013
quotequote all
Another Public Service Well Executed I Reckon... !lick

phillpot

17,509 posts

212 months

Thursday 14th March 2013
quotequote all

Slacken the six (?) bolts hoding the tail housing to the main body of the gearbox and majority of oil will run out.

Ragtop

592 posts

230 months

Thursday 14th March 2013
quotequote all
Get one of these:



You can suck most of the oil out with it, then clean it out and use it to put the fresh oil in.

Graham

Jed-S

660 posts

245 months

Thursday 14th March 2013
quotequote all
You can drill and tap a drain plug in a type 9 box. Something like this:

http://www.british-cars.org/mg-midget-sprite-techn...


ElvisWedgely

Original Poster:

2,715 posts

194 months

Thursday 14th March 2013
quotequote all
Well, they say 'there is more than one way to skin a cat', and in this instance seems very true. From suction pumps to drilling holes to tilting the gearbox. Why couldn't Ford just put a drain plug in it like everyone else. Still, you live and learn. Thanks for all the information guys. I have a lot to choose from.

Tony. TCB.

Roy C

4,213 posts

313 months

Friday 15th March 2013
quotequote all
ElvisWedgely said:
Why couldn't Ford just put a drain plug in it like everyone else.
Think of the number of Type 9's they produced, then think of all the pennies they saved.