Measurement favour please

[Pupp]

Anoyone with a Serp engine or block to hand able to measure and let me know the distance between the crank centreline and the sump gasket mating face please? Much appreciated if so

[debaron]

Back in the garage tomorrow and mine is on the stand.

I'll put a vernier across it then!

[Pupp]

Thanks, that's really helpful

[debaron]

Hi Pupp


Ok - on my 4.6 block

from sump mating surface to bottom of crank = 40.52 mm

Crank diameter = 35.06 mm therefore to centerline = 40.52 + (35.06 x 0.5) = 58.05 mm


HTH


Ryan

[Pupp]

Many thanks